Cần biết

Ưu đãi: Giảm 10% khi mua từ 3 sản phẩm

Nhận Linkdown 
Ngay sau khi chuyển khoản.

Lưu trữ và bảo mật
Thông tin khách hàng được bảo mật tuyệt đối

Thanh Toán Sau 
Quý khách nhận hàng tận tay trước khi trả tiền

Hỗ Trợ Online
Mr Thiện : 086.2580254 ( DĐ: 0168.8114282)
Ms.Tình: 0839.718.463
Hotline 1: 0983.973.593  (zalo/viber)
Hotline 2: 0933996945 (zalo/viber)
Skype: hayegroup
KHUYẾN MÃI

Hoàn tiền 100% nếu sản phẩm không đúng mô tả
Hỗ trợ link Download khi file bị hỏng, đổi đĩa mới. Hỗ trợ file cài đặt khi mua từ 3 sản phẩm.

Video hướng dẫn học Mastercam từ V9 đến X5

Lượt Xem: 859 Mã sản phẩm: hdmv9x5
Tình trạng: Còn hàng
300.000đ
Số lượng: Mua ngay

Gọi đặt hàng và giao tận nhà nhanh: 0286.2580254-02839.718.463 ( Hotline: 0983.973.593)
Mua trực tiếp: 465 Xô Viết Nghệ Tĩnh,P26 Bình Thạnh- 50 Võ Thành Trang P11 Tân Bình

Bảo hành chu đáo.Tìm hiểu

Giao hàng tận nơi.Tìm hiểu

Hãy ủng hộ cho chúng tôi bằng cách click và share 

 

Mua trực tiếp:

- 465 Xô Viết Nghệ Tĩnh,P26 Bình Thạnh

- 50 Võ Thành Trang P11 Tân Bình

Gọi đặt hàng và giao tận nhà nhanh: 0286.2580254-02839.718.463 ( Hotline: 0983.973.593)

  • Giảm giá 10% khi mua từ 3 sản phẩm, ( không tính các sản phẩm đã khuyến mãi)
  • Cung cấp linkdown cho mọi tài liệu cho khách hàng cần gấp, ở nước ngoài.
  • Miễn phí file cài đặt phần mềm qua mail khi mua từ 2 sản phẩm

 

Video hướng dẫn học Mastercam từ V9 đến X5

StreamingTeacher – a selection of flash courses in MasterCAM V9-X5 (2011)
English | Flash | 6.1 GB

Nếu có khả năng tiếng Anh hoặc bạn đang làm việc ở nước ngoài thì bộ DVD mastercam này sẽ là cẩm nang gối đầu giường, bạn phải tìm mọi cách để có được nó, sẽ không làm bạn thất vọng.

Tài liệu Mastercam này dạng video khá đầy đủ và nội dung bao trùm hết các kiến thức về lập trình trên phần mềm Mastercam, bạn có thể chọn ra phần mình cần học, và học nghiêm túc là có thể thành thạo Mastercam trong thời gian ngắn.

Với mức giá ở nước ngoài lên tới vài ngàn USD, còn ở VN thì rẻ rồi, bạn ở xa có thể lấy link download
.
Đây là tổng hợp video dạy online của Mastercam Bắc Mĩ, khóa học này dành cho những người trả phí và học online và được tổng hợp thành DVD để giúp những người tự học. Thời gian học trong khóa học này cho một người là từ 6 tháng đến 1 năm.

Nội dung chính trong đĩa này chủ yếu là video hướng dẫn của chuyên gia kĩ thuật Mastercam, đồng thời cũng kèm theo nhiều file pdf hướng dẫn chi tiết cũng như giải thích cặn kẽ hơn.

Dưới đây là nội dung mà các phiên bản Mastercam được dùng để dạy:
Đến gần 1000 video do dùng flash nên dung lượng mới có 6.1GB chứ không thì không biết khủng cỡ nào. Video dạy tất cả các phiên bản nhưng mọi người lưu ý không phải là dạy giống nhau, ví dụ như khi người ta đang dạy phiên bản cũ, thì phiên bản mới cập nhật và dạy tiếp trên phiên bản Mastercam mới do đó hoàn toàn không có video nào lặp lại và tất nhiên nội dung thì trải rộng tất cả các vấn đề liên quan đến phần mềm Mastercam.

Dưới đây là list video cho những ai còn thắc mắc là có đáng để mua và có đúng như lời giới thiệu.
 
MasterCAM X5
MasterCAM X4
MasterCAM X3
MasterCAM X2
MasterCAM X
MasterCAM V9
MasterCAM ART
MasterCAM Technical Tips
MasterCAM Certification


Nội dung:

1002 - The Mastercam Environment Interface Group.swf...............: SWF 801x601 5.000 fps 00:03:50.600 MPEG Audio 1 channel
1002a - Auto Cursor Auto Highlight feature.swf.....................: SWF 801x601 5.000 fps 00:06:52.400 MPEG Audio 1 channel
1002b - Left Right Click Functionality.swf.........................: SWF 801x601 5.000 fps 00:04:53.200 MPEG Audio 1 channel
1002c - Shortcut Hotkeys.swf.......................................: SWF 801x601 5.000 fps 00:10:02.000 MPEG Audio 1 channel
1002d - C-Hooks.swf................................................: SWF 801x601 4.000 fps 00:04:01.250 MPEG Audio 1 channel
1002e - Cartesian Coordinate system.swf............................: SWF 801x601 4.000 fps 00:06:09.250 MPEG Audio 1 channel
1003 - Help Menu.swf...............................................: SWF 801x601 5.000 fps 00:04:13.400 MPEG Audio 1 channel
1003a - Allocations.swf............................................: SWF 801x601 5.000 fps 00:02:22.200 MPEG Audio 1 channel
1003b - Start Exit Auto-Save.swf...................................: SWF 801x601 5.000 fps 00:04:29.200 MPEG Audio 1 channel
1003c - Editor Selection Screen settings and Appearance.swf........: SWF 801x601 5.000 fps 00:08:11.600 MPEG Audio 1 channel
1003d - CAD Settings.swf...........................................: SWF 801x601 5.000 fps 00:04:45.400 MPEG Audio 1 channel
1003e - NC Settings.swf............................................: SWF 801x601 5.000 fps 00:06:21.200 MPEG Audio 1 channel
1003f - Toolbar Key assignments.swf................................: SWF 801x601 5.000 fps 00:07:37.800 MPEG Audio 1 channel
1003g - How to open Mastercam with a Custom Configuration.swf......: SWF 801x601 5.000 fps 00:03:09.000 MPEG Audio 1 channel
1003i - Intro to System Configuration.swf..........................: SWF 801x601 5.000 fps 00:01:15.600 MPEG Audio 1 channel
1004a - Sketch input values.swf....................................: SWF 801x601 4.000 fps 00:03:38.250 MPEG Audio 1 channel
1004b - Creating Geometric Points.swf..............................: SWF 801x601 4.000 fps 00:02:24.250 MPEG Audio 1 channel
1004c - G-views Cplanes.swf........................................: SWF 801x601 5.000 fps 00:07:50.200 MPEG Audio 1 channel
1004d - Geometry Attributes.swf....................................: SWF 801x601 5.000 fps 00:08:50.400 MPEG Audio 1 channel
1004e - Levels and Levels Mgr.swf..................................: SWF 801x601 5.000 fps 00:08:57.400 MPEG Audio 1 channel
1004f - Analyze Basics.swf.........................................: SWF 801x601 5.000 fps 00:04:55.600 MPEG Audio 1 channel
1004g - Geometry Selection.swf.....................................: SWF 801x601 5.000 fps 00:09:57.600 MPEG Audio 1 channel
1004h1 - Geometry Selection Methods part 2.swf.....................: SWF 801x601 5.000 fps 00:09:40.800 MPEG Audio 1 channel
1004h2 - Partial Chaining.swf......................................: SWF 801x601 5.000 fps 00:07:30.000 MPEG Audio 1 channel
1004h3 - Chaining Options.swf......................................: SWF 801x601 5.000 fps 00:09:11.400 MPEG Audio 1 channel
1004i - Delete Menu.swf............................................: SWF 801x601 5.000 fps 00:04:18.800 MPEG Audio 1 channel
1005 - Creating Rectangles.swf.....................................: SWF 801x601 5.000 fps 00:03:05.800 MPEG Audio 1 channel
1006 - Line Creation Basics.swf....................................: SWF 801x601 5.000 fps 00:07:24.800 MPEG Audio 1 channel
1006a - Create line Tangent.swf....................................: SWF 801x601 5.000 fps 00:03:06.000 MPEG Audio 1 channel
1006b - Creating Line Polar.swf....................................: SWF 801x601 4.000 fps 00:03:33.750 MPEG Audio 1 channel
1006c - Creating Line Perpendicular.swf............................: SWF 801x601 4.000 fps 00:04:42.000 MPEG Audio 1 channel
1007 - Creating Arc (Basic).swf....................................: SWF 801x601 5.000 fps 00:05:28.200 MPEG Audio 1 channel
1007a - Creating Arcs Tangent.swf..................................: SWF 801x601 5.000 fps 00:06:49.000 MPEG Audio 1 channel
1007b - Characteristics of a Circle..swf...........................: SWF 801x601 4.000 fps 00:06:04.500 MPEG Audio 1 channel
1008 - Trim.swf....................................................: SWF 801x601 5.000 fps 00:04:40.600 MPEG Audio 1 channel
1008b - More Trimming Options.swf..................................: SWF 801x601 4.000 fps 00:04:17.250 MPEG Audio 1 channel
1009 - Fillet Basics.swf...........................................: SWF 801x601 5.000 fps 00:02:43.000 MPEG Audio 1 channel
1009a - More Filleting Options.swf.................................: SWF 801x601 5.000 fps 00:04:43.000 MPEG Audio 1 channel
1010 - X-Form Basics.swf...........................................: SWF 801x601 5.000 fps 00:04:23.200 MPEG Audio 1 channel
1011 - Project 1 Instructions.swf..................................: SWF 801x601 5.000 fps 00:01:50.000 MPEG Audio 1 channel
1012 - Project 1 Creation.swf......................................: SWF 801x601 5.000 fps 00:09:53.200 MPEG Audio 1 channel
1013 - Second Project Creation.swf.................................: SWF 801x601 5.000 fps 00:11:06.600 MPEG Audio 1 channel
1014 - Third Project Creation.swf..................................: SWF 801x601 5.000 fps 00:16:57.600 MPEG Audio 1 channel
12001 - FileGet Crashes.swf........................................: SWF 801x601 5.000 fps 00:02:54.000 MPEG Audio 1 channel
12002 - Configuration File Overview.swf............................: SWF 801x601 5.000 fps 00:06:28.400 MPEG Audio 1 channel
12003 - Video Problems.swf.........................................: SWF 801x601 5.000 fps 00:06:18.400 MPEG Audio 1 channel
12004 - NetHASP Installation Setup.swf.............................: SWF 801x601 4.000 fps 00:13:38.500 MPEG Audio 1 channel
12005 - Verify Basics.swf..........................................: SWF 801x601 4.000 fps 00:02:44.000 MPEG Audio 1 channel
12006 - Stock Definition Setup.swf.................................: SWF 801x601 4.000 fps 00:06:40.250 MPEG Audio 1 channel
12007 - Zoom Sectioning Accurate Zoom.swf..........................: SWF 801x601 4.000 fps 00:04:43.750 MPEG Audio 1 channel
12008 - Custom Tool Definition.swf.................................: SWF 801x601 4.000 fps 00:06:26.500 MPEG Audio 1 channel
12009 - Custom Stock Definition.swf................................: SWF 801x601 4.000 fps 00:04:38.250 MPEG Audio 1 channel
12010 - STL Compare and STL from Previous Operation.swf............: SWF 801x601 4.000 fps 00:09:29.250 MPEG Audio 1 channel
2000 - Overview of Toolpath Parameters.swf.........................: SWF 801x601 4.000 fps 00:18:19.000 MPEG Audio 1 channel
2000aa - Operations Manager Part 1.swf.............................: SWF 801x601 4.000 fps 00:04:17.250 MPEG Audio 1 channel
2000ab - Operations Manager Part 2.swf.............................: SWF 801x601 4.000 fps 00:05:31.250 MPEG Audio 1 channel
2000ac - Operations Manager Part 3.swf.............................: SWF 801x601 4.000 fps 00:03:44.750 MPEG Audio 1 channel
2000ad - Operations Manager Part 4.swf.............................: SWF 801x601 4.000 fps 00:02:54.750 MPEG Audio 1 channel
2000ae - Operations Manager Part 5.swf.............................: SWF 801x601 4.000 fps 00:03:51.000 MPEG Audio 1 channel
2001 - Standard Contour.swf........................................: SWF 801x601 4.000 fps 00:01:56.250 MPEG Audio 1 channel
2001b - Basic Contour options.swf..................................: SWF 801x601 4.000 fps 00:15:36.250 MPEG Audio 1 channel
2001c - Contour from a point.swf...................................: SWF 801x601 4.000 fps 00:02:36.250 MPEG Audio 1 channel
2001d - Contour Ramp.swf...........................................: SWF 801x601 4.000 fps 00:02:35.000 MPEG Audio 1 channel
2001e - Contour 2D Chamfer.swf.....................................: SWF 801x601 4.000 fps 00:05:37.000 MPEG Audio 1 channel
2001f - Contour Re-Machine.swf.....................................: SWF 801x601 4.000 fps 00:04:19.750 MPEG Audio 1 channel
2001g - Cutter Comp.swf............................................: SWF 801x601 4.000 fps 00:11:21.750 MPEG Audio 1 channel
2002a - Face Toolpath 1.swf........................................: SWF 801x601 4.000 fps 00:10:43.250 MPEG Audio 1 channel
2002b - Face Toolpath 2.swf........................................: SWF 801x601 4.000 fps 00:02:49.750 MPEG Audio 1 channel
2003 - Basic Drill toolpath.swf....................................: SWF 801x601 4.000 fps 00:04:46.750 MPEG Audio 1 channel
2003b - Drill Toolpath using automatic Point selection.swf.........: SWF 801x601 4.000 fps 00:03:20.750 MPEG Audio 1 channel
2005 - Model Prep and Zero Shift the 10 step method.swf............: SWF 801x601 4.000 fps 00:26:00.500 MPEG Audio 1 channel
2005a - Pocket Toolpath Basics.swf.................................: SWF 801x601 4.000 fps 00:02:54.000 MPEG Audio 1 channel
2005b - Pocket Entry Ramp.swf......................................: SWF 801x601 4.000 fps 00:03:17.000 MPEG Audio 1 channel
2005c - Pocket Entry Helix.swf.....................................: SWF 801x601 4.000 fps 00:02:06.750 MPEG Audio 1 channel
2005d - Pocket Entry Helix Follow Boundary.swf.....................: SWF 801x601 4.000 fps 00:01:07.750 MPEG Audio 1 channel
2005e - Pocket Entry with Depth cuts Finish pass final depth.swf...: SWF 801x601 4.000 fps 00:02:24.250 MPEG Audio 1 channel
2005f - Pocket Start on a Point for drilled entry hole.swf.........: SWF 801x601 4.000 fps 00:02:25.000 MPEG Audio 1 channel
2009 - Toolpath Project 1.swf......................................: SWF 801x601 5.000 fps 00:03:13.600 MPEG Audio 1 channel
2010 - Job Setup.swf...............................................: SWF 801x601 5.000 fps 00:05:56.800 MPEG Audio 1 channel
2011 - Face Toolpath.swf...........................................: SWF 801x601 5.000 fps 00:08:24.200 MPEG Audio 1 channel
2012 - Contour Toolpath.swf........................................: SWF 801x601 5.000 fps 00:18:25.000 MPEG Audio 1 channel
2013 - Circle Mill Toolpath.swf....................................: SWF 801x601 5.000 fps 00:09:51.600 MPEG Audio 1 channel
2014 - Pocket Face Toolpath.swf....................................: SWF 801x601 5.000 fps 00:13:37.200 MPEG Audio 1 channel
2015 - Start Hole.swf..............................................: SWF 801x601 5.000 fps 00:08:27.000 MPEG Audio 1 channel
2500 - More Line Creation Methods.swf..............................: SWF 801x601 4.000 fps 00:05:11.750 MPEG Audio 1 channel
2501 - Modify options continued.swf................................: SWF 801x601 4.000 fps 00:18:25.500 MPEG Audio 1 channel
2502 - Absolute vs. Incremental basics.swf.........................: SWF 701x501 6.000 fps 00:04:04.000 MPEG Audio 1 channel
2503 - More Drill Toolpath Options.swf.............................: SWF 801x601 4.000 fps 00:16:40.250 MPEG Audio 1 channel
2504 - Lead In Lead Out Basics.swf.................................: SWF 801x601 5.000 fps 00:07:32.000 MPEG Audio 1 channel
2505 - Pocket Island Facing.swf....................................: SWF 801x601 4.000 fps 00:07:17.000 MPEG Audio 1 channel
2506 - Pocket Face.swf.............................................: SWF 801x601 4.000 fps 00:04:55.250 MPEG Audio 1 channel
2507 - Pocket Re-machine.swf.......................................: SWF 801x601 5.000 fps 00:06:20.600 MPEG Audio 1 channel
2508 - More detail on the Pocket finishing parameters.swf..........: SWF 801x601 5.000 fps 00:09:41.800 MPEG Audio 1 channel
2509 - Slot Mill Toolpath.swf......................................: SWF 801x601 5.000 fps 00:10:59.600 MPEG Audio 1 channel
2510 - Auto Drill Toolpath.swf.....................................: SWF 801x601 5.000 fps 00:10:34.400 MPEG Audio 1 channel
2511 - Thread Mill Toolpath.swf....................................: SWF 801x601 5.000 fps 00:14:42.800 MPEG Audio 1 channel
2512 - Helix-Bore Toolpath.swf.....................................: SWF 801x601 5.000 fps 00:11:03.000 MPEG Audio 1 channel
2515 - Open Pocket on a Solid.swf..................................: SWF 801x601 5.000 fps 00:03:11.200 MPEG Audio 1 channel
2516 - Pocket Face on a Solid.swf..................................: SWF 657x489 10.000 fps 00:03:11.900 MPEG Audio 1 channel
2517 - Working with 2 Work offsets.swf.............................: SWF 801x601 5.000 fps 00:11:33.200 MPEG Audio 1 channel
2518 - Shifting the WCS.swf........................................: SWF 801x601 5.000 fps 00:20:17.800 MPEG Audio 1 channel
2519 - Creating Custom Views.swf...................................: SWF 781x609 7.000 fps 00:10:20.571 MPEG Audio 1 channel
2520 - Creating Splines.swf........................................: SWF 801x601 4.000 fps 00:08:59.250 MPEG Audio 1 channel
2521 - Drafting Dimensions.swf.....................................: SWF 801x601 4.000 fps 00:13:49.250 MPEG Audio 1 channel
2522 - Printing and Plotting.swf...................................: SWF 801x601 4.000 fps 00:08:04.500 MPEG Audio 1 channel
2523 - Transform Toolpaths.swf.....................................: SWF 801x601 4.000 fps 00:13:58.250 MPEG Audio 1 channel
2524 - Lead In Lead Out Advanced.swf...............................: SWF 801x601 5.000 fps 00:09:28.000 MPEG Audio 1 channel
2525 - Shading.swf.................................................: SWF 801x579 4.000 fps 00:07:53.500 MPEG Audio 1 channel
2526 - 3D Wireframe Project 1a.swf.................................: SWF 801x579 4.000 fps 00:12:08.500 MPEG Audio 1 channel
2527 - 3D Wireframe Project 1b.swf.................................: SWF 801x579 4.000 fps 00:04:34.250 MPEG Audio 1 channel
2528 - 3D Wireframe Project 2.swf..................................: SWF 801x579 4.000 fps 00:14:54.000 MPEG Audio 1 channel
3100 - Introduction to Streamingteacher.swf........................: SWF 801x579 4.000 fps 00:06:41.750 MPEG Audio 1 channel
3105 - Tooltips and Learning Mode Prompts.swf......................: SWF 801x579 4.000 fps 00:05:18.250 MPEG Audio 1 channel
3106 - Help Menu.swf...............................................: SWF 801x579 4.000 fps 00:02:37.250 MPEG Audio 1 channel
3107 - MRU.swf.....................................................: SWF 801x579 4.000 fps 00:02:52.250 MPEG Audio 1 channel
3109 - Windows Basics.swf..........................................: SWF 801x579 4.000 fps 00:04:55.000 MPEG Audio 1 channel
3109-13 - Windows Basics.swf.......................................: SWF 801x579 4.000 fps 00:08:07.250 MPEG Audio 1 channel
3111 - CADCAM Coordinate System.swf................................: SWF 801x579 4.000 fps 00:06:07.000 MPEG Audio 1 channel
3201 - Menus Interface.swf.........................................: SWF 801x579 4.000 fps 00:02:59.500 MPEG Audio 1 channel
3203 - Toolbars.swf................................................: SWF 801x579 4.000 fps 00:08:38.750 MPEG Audio 1 channel
3205 - Hotkeys.swf.................................................: SWF 801x579 4.000 fps 00:06:44.250 MPEG Audio 1 channel
3207 - Mouse Actions.swf...........................................: SWF 801x579 4.000 fps 00:07:54.500 MPEG Audio 1 channel
3209 - Keyboard Data Entry.swf.....................................: SWF 801x579 4.000 fps 00:03:40.500 MPEG Audio 1 channel
3209-13 - Keyboard Data Entry.swf..................................: SWF 801x579 4.000 fps 00:06:22.500 MPEG Audio 1 channel
3209tt-13 - Keyboard Data Entry.swf................................: SWF 801x579 4.000 fps 00:06:48.000 MPEG Audio 1 channel
3211 - System Info View Gnomons and Status Bar Feedback.swf........: SWF 801x579 4.000 fps 00:07:30.750 MPEG Audio 1 channel
3213 - View Control.swf............................................: SWF 801x579 4.000 fps 00:04:53.750 MPEG Audio 1 channel
3215 - Auto Cursor Auto Highlight.swf..............................: SWF 801x579 4.000 fps 00:11:20.500 MPEG Audio 1 channel
3217 - Status Bar.swf..............................................: SWF 801x579 4.000 fps 00:03:42.000 MPEG Audio 1 channel
3219 - Operations Manager Panel Access.swf.........................: SWF 801x579 4.000 fps 00:02:10.250 MPEG Audio 1 channel
3221 - General Selection Ribbon Bar.swf............................: SWF 801x579 4.000 fps 00:05:19.500 MPEG Audio 1 channel
3223 - Pre-Selection.swf...........................................: SWF 801x579 4.000 fps 00:02:48.750 MPEG Audio 1 channel
3225 - Masking.swf.................................................: SWF 801x579 4.000 fps 00:06:12.000 MPEG Audio 1 channel
3227a - Chaining Basics.swf........................................: SWF 801x579 4.000 fps 00:08:03.000 MPEG Audio 1 channel
3227b - Chain Selection Problems.swf...............................: SWF 801x579 4.000 fps 00:08:43.750 MPEG Audio 1 channel
3227c-13 - Chaining for Toolpaths.swf..............................: SWF 801x579 4.000 fps 00:07:55.250 MPEG Audio 1 channel
3227c-13b - Chaining - Unselect All Option.swf.....................: SWF 801x579 4.000 fps 00:01:39.250 MPEG Audio 1 channel
3227d-13 - Chaining for Toolpaths 2 Partial Chain.swf..............: SWF 801x579 4.000 fps 00:05:19.250 MPEG Audio 1 channel
3227e-13 - Window and Polygon Chaining.swf.........................: SWF 801x579 4.000 fps 00:05:10.500 MPEG Audio 1 channel
3227f-13 - Feature Recognition in Chaining.swf.....................: SWF 801x579 4.000 fps 00:06:13.250 MPEG Audio 1 channel
3227f-13b - Chaining Multiple Features.swf.........................: SWF 801x579 4.000 fps 00:01:20.500 MPEG Audio 1 channel
3227g - Analyze Chain.swf..........................................: SWF 801x579 4.000 fps 00:07:43.250 MPEG Audio 1 channel
3227g-13 - Analyze Chain.swf.......................................: SWF 801x579 4.000 fps 00:07:43.250 MPEG Audio 1 channel
3227h-13 - Chaining Solids.swf.....................................: SWF 801x579 4.000 fps 00:05:39.750 MPEG Audio 1 channel
3229 - Levels Basics.swf...........................................: SWF 801x579 4.000 fps 00:08:15.250 MPEG Audio 1 channel
3230 - More on Levels.swf..........................................: SWF 801x579 4.000 fps 00:02:44.500 MPEG Audio 1 channel
3230-13 - Advanced Levels.swf......................................: SWF 801x579 4.000 fps 00:06:35.000 MPEG Audio 1 channel
3231 - Levels Manager.swf..........................................: SWF 801x579 4.000 fps 00:03:46.750 MPEG Audio 1 channel
3235 - Construction Plane.swf......................................: SWF 801x579 4.000 fps 00:08:47.750 MPEG Audio 1 channel
3237 - Graphics View.swf...........................................: SWF 801x579 4.000 fps 00:03:52.750 MPEG Audio 1 channel
3239 - Named Views WCS.swf.........................................: SWF 801x579 4.000 fps 00:12:18.000 MPEG Audio 1 channel
3240 - Changing The WCS.swf........................................: SWF 801x579 4.000 fps 00:06:49.750 MPEG Audio 1 channel
3241 - Undo Delete.swf.............................................: SWF 801x579 4.000 fps 00:05:01.750 MPEG Audio 1 channel
3243 - Multi-Viewports.swf.........................................: SWF 801x579 4.000 fps 00:03:05.250 MPEG Audio 1 channel
3300-13 - Auto Cursor Power Keys Setting.swf.......................: SWF 801x579 4.000 fps 00:04:15.750 MPEG Audio 1 channel
3303 - Colors Line Style and Width.swf.............................: SWF 801x579 4.000 fps 00:04:47.250 MPEG Audio 1 channel
3305 - Attributes Manager.swf......................................: SWF 801x579 4.000 fps 00:07:05.000 MPEG Audio 1 channel
3306 - File Merge Pattern.swf......................................: SWF 801x579 4.000 fps 00:07:14.750 MPEG Audio 1 channel
3307 - Groups Result.swf...........................................: SWF 801x579 4.000 fps 00:06:57.750 MPEG Audio 1 channel
3308 - Blank Un-Blank Hide Un-Hide.swf.............................: SWF 801x579 4.000 fps 00:04:30.500 MPEG Audio 1 channel
3309 - 2D 3D Mode.swf..............................................: SWF 801x579 4.000 fps 00:08:06.000 MPEG Audio 1 channel
3311 - Ribbon Bar.swf..............................................: SWF 801x579 4.000 fps 00:04:57.500 MPEG Audio 1 channel
3313 - Live Fixed and Phantom Entities.swf.........................: SWF 801x579 4.000 fps 00:01:49.000 MPEG Audio 1 channel
3315 - Line Function.swf...........................................: SWF 801x579 4.000 fps 00:06:51.250 MPEG Audio 1 channel
3316 - More on Lines.swf...........................................: SWF 801x579 4.000 fps 00:03:53.000 MPEG Audio 1 channel
3317 - Arc Tool.swf................................................: SWF 801x579 4.000 fps 00:03:22.500 MPEG Audio 1 channel
3317b - Arc Polar.swf..............................................: SWF 801x579 4.000 fps 00:05:17.500 MPEG Audio 1 channel
3317c - Create Circle Edge Point.swf...............................: SWF 801x579 4.000 fps 00:03:21.750 MPEG Audio 1 channel
3317d - Create Arc Endpoint.swf....................................: SWF 801x579 4.000 fps 00:02:18.250 MPEG Audio 1 channel
3317e - Create Arc 3 Points.swf....................................: SWF 801x579 4.000 fps 00:02:03.250 MPEG Audio 1 channel
3317f - Create Arc Polar Endpoints.swf.............................: SWF 801x579 4.000 fps 00:02:58.250 MPEG Audio 1 channel
3317g - Create Arc Tangent.swf.....................................: SWF 801x579 4.000 fps 00:10:31.000 MPEG Audio 1 channel
3318 - Relative Positioning.swf....................................: SWF 801x579 4.000 fps 00:03:11.250 MPEG Audio 1 channel
3319 - Fillet Tool.swf.............................................: SWF 801x579 4.000 fps 00:05:24.750 MPEG Audio 1 channel
3320 - Chamfer Tool.swf............................................: SWF 801x579 4.000 fps 00:03:34.750 MPEG Audio 1 channel
3321 - Point Function.swf..........................................: SWF 801x579 4.000 fps 00:06:53.750 MPEG Audio 1 channel
3322 - Create Bolt Hole Circles.swf................................: SWF 801x579 4.000 fps 00:01:25.000 MPEG Audio 1 channel
3323 - Rectangle Rectangular Shapes.swf............................: SWF 801x579 4.000 fps 00:05:05.000 MPEG Audio 1 channel
3323b - Create Bounding Box 2D 3D.swf..............................: SWF 801x579 4.000 fps 00:03:22.250 MPEG Audio 1 channel
3324 - Create Polygon Ellipse.swf..................................: SWF 801x579 4.000 fps 00:04:21.000 MPEG Audio 1 channel
3325 - Spline Tool.swf.............................................: SWF 801x579 4.000 fps 00:05:41.500 MPEG Audio 1 channel
3326 - Converting Splines to Arcs.swf..............................: SWF 801x579 4.000 fps 00:06:30.750 MPEG Audio 1 channel
3327 - Trimming Tool.swf...........................................: SWF 801x579 4.000 fps 00:07:52.500 MPEG Audio 1 channel
3327-13 - Trimming Tool (Trim Break Part 1).swf....................: SWF 801x579 4.000 fps 00:07:49.500 MPEG Audio 1 channel
3328-13 - Levels Basics.swf........................................: SWF 801x579 4.000 fps 00:08:11.000 MPEG Audio 1 channel
3329 - Break Functions.swf.........................................: SWF 801x579 4.000 fps 00:07:20.500 MPEG Audio 1 channel
3329-13 - Break Functions (Trim Break Part 2).swf..................: SWF 801x579 4.000 fps 00:06:25.500 MPEG Audio 1 channel
3333 - 2D Dimensioning.swf.........................................: SWF 801x579 4.000 fps 00:12:28.750 MPEG Audio 1 channel
3335a - Translate.swf..............................................: SWF 801x579 4.000 fps 00:05:26.500 MPEG Audio 1 channel
3335b - Translate Project Function.swf.............................: SWF 801x579 4.000 fps 00:04:13.000 MPEG Audio 1 channel
3335c-13 - XForm Dynamic.swf.......................................: SWF 801x579 4.000 fps 00:09:20.750 MPEG Audio 1 channel
3337 - Mirror.swf..................................................: SWF 801x579 4.000 fps 00:03:09.750 MPEG Audio 1 channel
3339 - XForm Rotate.swf............................................: SWF 801x579 4.000 fps 00:03:51.750 MPEG Audio 1 channel
3340a - X-Form Translate 3D Standard.swf...........................: SWF 801x579 4.000 fps 00:01:26.500 MPEG Audio 1 channel
3340a-13 - XForm Translate 3D Standard.swf.........................: SWF 801x579 4.000 fps 00:06:53.000 MPEG Audio 1 channel
3340b - X-Form Translate 3D Auxiliary View.swf.....................: SWF 801x579 4.000 fps 00:02:13.500 MPEG Audio 1 channel
3341-13 - X-Form Move to Origin.swf................................: SWF 801x579 4.000 fps 00:00:58.750 MPEG Audio 1 channel
3347j - Solid Sweep - Part 2.swf...................................: SWF 801x579 4.000 fps 00:07:08.500 MPEG Audio 1 channel
3348 - Intro to Solids.swf.........................................: SWF 801x579 4.000 fps 00:07:23.250 MPEG Audio 1 channel
3348L - Solid Shell Function.swf...................................: SWF 801x579 4.000 fps 00:07:38.000 MPEG Audio 1 channel
3348a - 3D Primitives Basics.swf...................................: SWF 801x579 4.000 fps 00:07:18.500 MPEG Audio 1 channel
3348b - Creating Primitive Shapes.swf..............................: SWF 801x579 4.000 fps 00:09:35.500 MPEG Audio 1 channel
3348c - Solid Primitives Project.swf...............................: SWF 801x579 4.000 fps 00:13:06.250 MPEG Audio 1 channel
3348d - Surface Solids Shading.swf.................................: SWF 801x579 4.000 fps 00:07:34.250 MPEG Audio 1 channel
3348e - Solid Extrude Function - part 1.swf........................: SWF 801x579 4.000 fps 00:02:03.000 MPEG Audio 1 channel
3348f - Solid Extrude Function - part 2.swf........................: SWF 801x579 4.000 fps 00:03:28.000 MPEG Audio 1 channel
3348g - Solid Extrude Thin Wall Option.swf.........................: SWF 801x579 4.000 fps 00:06:38.500 MPEG Audio 1 channel
3348h - Solid Revolve.swf..........................................: SWF 801x579 4.000 fps 00:04:18.250 MPEG Audio 1 channel
3348i - Solid Revolve Cut.swf......................................: SWF 801x579 4.000 fps 00:02:19.750 MPEG Audio 1 channel
3348j - Solid Sweep.swf............................................: SWF 801x579 4.000 fps 00:03:31.000 MPEG Audio 1 channel
3348k - Solid Draft Faces.swf......................................: SWF 801x579 4.000 fps 00:06:47.000 MPEG Audio 1 channel
3401 - Operations Manager Overview.swf.............................: SWF 801x579 4.000 fps 00:12:23.500 MPEG Audio 1 channel
3407 - Common Toolpath Parameters - Part 1.swf.....................: SWF 801x579 4.000 fps 00:06:39.250 MPEG Audio 1 channel
3407-13 - Common Toolpath Parameters - Part 1.swf..................: SWF 801x579 4.000 fps 00:06:11.250 MPEG Audio 1 channel
3407b-13b - Lock Speed and Feed Settings.swf.......................: SWF 801x579 4.000 fps 00:03:53.500 MPEG Audio 1 channel
3408 - Common Toolpath Parameters - Part 2.swf.....................: SWF 801x579 4.000 fps 00:06:47.250 MPEG Audio 1 channel
3408-13 - Common Toolpath Parameters - Part 2.swf..................: SWF 801x579 4.000 fps 00:06:40.250 MPEG Audio 1 channel
3408a - Absolute vs. Incremental Depths.swf........................: SWF 801x579 4.000 fps 00:07:25.250 MPEG Audio 1 channel
3408a-13 - Absolute vs. Incremental Depths.swf.....................: SWF 801x579 4.000 fps 00:09:23.500 MPEG Audio 1 channel
3408b - Backplot.swf...............................................: SWF 801x579 4.000 fps 00:06:05.250 MPEG Audio 1 channel
3408c - Verify.swf.................................................: SWF 801x579 4.000 fps 00:09:00.250 MPEG Audio 1 channel
3408d - Cutter Compensation.swf....................................: SWF 801x579 4.000 fps 00:11:08.000 MPEG Audio 1 channel
3408d-13 - Cutter Compensation.swf.................................: SWF 801x579 4.000 fps 00:10:59.750 MPEG Audio 1 channel
3409 - Facing Function.swf.........................................: SWF 801x579 4.000 fps 00:12:42.000 MPEG Audio 1 channel
3409-13a - Facing Toolpath.swf.....................................: SWF 801x579 4.000 fps 00:10:29.000 MPEG Audio 1 channel
3409-13b - Facing Toolpath Parameters.swf..........................: SWF 801x579 4.000 fps 00:08:16.250 MPEG Audio 1 channel
3411a - Pocket Basics.swf..........................................: SWF 801x579 4.000 fps 00:06:35.500 MPEG Audio 1 channel
3411a-13 - Pocket Basics.swf.......................................: SWF 801x579 4.000 fps 00:11:04.000 MPEG Audio 1 channel
3411b - Pocket Incremental Depths.swf..............................: SWF 801x579 4.000 fps 00:05:12.250 MPEG Audio 1 channel
3411b-13 - Pocket Incremental Depths.swf...........................: SWF 801x579 4.000 fps 00:05:05.250 MPEG Audio 1 channel
3411c - Pocket Finish Passes.swf...................................: SWF 801x579 4.000 fps 00:04:07.250 MPEG Audio 1 channel
3411c-13 - Pocket Depth Cuts and Finish Passes.swf.................: SWF 801x579 4.000 fps 00:03:47.000 MPEG Audio 1 channel
3411d - Pocket Basic Entry Parameters.swf..........................: SWF 801x579 4.000 fps 00:06:45.750 MPEG Audio 1 channel
3411d-13 - Pocket Entry Ramp Helix.swf.............................: SWF 801x579 4.000 fps 00:06:25.500 MPEG Audio 1 channel
3411e - Pocket Plunge Entry in a Hole.swf..........................: SWF 801x579 4.000 fps 00:03:01.500 MPEG Audio 1 channel
3411e-13 - Pocket Plunge Entry in a Hole.swf.......................: SWF 801x579 4.000 fps 00:02:53.250 MPEG Audio 1 channel
3411f - Pocket Additional Finish Operation.swf.....................: SWF 801x579 4.000 fps 00:04:35.500 MPEG Audio 1 channel
3411f-13 - Pocket Additional Finish Operation.swf..................: SWF 801x579 4.000 fps 00:06:14.750 MPEG Audio 1 channel
3411g - Pocket Face Toolpath.swf...................................: SWF 801x579 4.000 fps 00:10:54.750 MPEG Audio 1 channel
3411g-13 - Pocket Face Toolpath.swf................................: SWF 801x579 4.000 fps 00:10:31.000 MPEG Audio 1 channel
3411h - Pocket Island Face Toolpath.swf............................: SWF 801x579 4.000 fps 00:04:17.500 MPEG Audio 1 channel
3411h-13 - Pocket Island Face Toolpath.swf.........................: SWF 801x579 4.000 fps 00:06:57.250 MPEG Audio 1 channel
3411i - Pocket Re-Machining.swf....................................: SWF 801x579 4.000 fps 00:06:46.250 MPEG Audio 1 channel
3411i-13 - Pocket Re-Machining.swf.................................: SWF 801x579 4.000 fps 00:06:15.750 MPEG Audio 1 channel
3411j - Open Pocket.swf............................................: SWF 801x579 4.000 fps 00:10:26.500 MPEG Audio 1 channel
3411j-13 - Open Pocket.swf.........................................: SWF 801x579 4.000 fps 00:09:29.750 MPEG Audio 1 channel
3413a - 2D Contour Function.swf....................................: SWF 801x579 4.000 fps 00:12:23.750 MPEG Audio 1 channel
3413a-13 - 2D Contour Function.swf.................................: SWF 801x579 4.000 fps 00:12:31.250 MPEG Audio 1 channel
3413b - 2D Contour - Lead In Out.swf...............................: SWF 801x579 4.000 fps 00:05:27.250 MPEG Audio 1 channel
3413b-13 - 2D Contour - Lead In Out.swf............................: SWF 801x579 4.000 fps 00:08:12.750 MPEG Audio 1 channel
3413c - 2D Contour - Depthcuts Multipass.swf.......................: SWF 801x579 4.000 fps 00:11:34.250 MPEG Audio 1 channel
3413c-13 - 2D Contour - Depthcuts Multipass.swf....................: SWF 801x579 4.000 fps 00:10:02.000 MPEG Audio 1 channel
3413d - 2D Contour - 2D Chamfer.swf................................: SWF 801x579 4.000 fps 00:05:25.250 MPEG Audio 1 channel
3413d-13 - 2D Contour - 2D Chamfer.swf.............................: SWF 801x579 4.000 fps 00:09:31.500 MPEG Audio 1 channel
3413e - 2D Contour - Chamfer Supplement.swf........................: SWF 801x579 4.000 fps 00:03:40.500 MPEG Audio 1 channel
3417a - Drill Function - Drill Parameters.swf......................: SWF 801x579 4.000 fps 00:05:50.250 MPEG Audio 1 channel
3417a-13 - Drill Function - Drill Parameters.swf...................: SWF 801x579 4.000 fps 00:06:02.000 MPEG Audio 1 channel
3417b - Drill Function - Entity Selection Methods 1.swf............: SWF 801x579 4.000 fps 00:02:36.750 MPEG Audio 1 channel
3417b-13 - Drill Function - Entity Selection Methods 1.swf.........: SWF 801x579 4.000 fps 00:05:00.750 MPEG Audio 1 channel
3417c - Drill Function - Entity Selection Methods 2.swf............: SWF 801x579 4.000 fps 00:02:17.500 MPEG Audio 1 channel
3417c-13 - Drill Function - Entity Selection Methods 2.swf.........: SWF 801x579 4.000 fps 00:08:47.500 MPEG Audio 1 channel
3417d-13 - Drill Operations and G Code Output.swf..................: SWF 801x579 4.000 fps 00:12:09.750 MPEG Audio 1 channel
3417e-13 - Boring Cycles and G Code Output.swf.....................: SWF 801x579 4.000 fps 00:05:42.000 MPEG Audio 1 channel
3417f-13 - Drill Change at point.swf...............................: SWF 801x579 4.000 fps 00:09:15.000 MPEG Audio 1 channel
3419 - Circmill.swf................................................: SWF 801x579 4.000 fps 00:05:31.750 MPEG Audio 1 channel
3419-13 - Circmill.swf.............................................: SWF 801x579 4.000 fps 00:09:30.000 MPEG Audio 1 channel
3421 - Threadmill.swf..............................................: SWF 801x579 4.000 fps 00:12:42.500 MPEG Audio 1 channel
3421a-13 - Threadmill part 1.swf...................................: SWF 801x579 4.000 fps 00:07:20.750 MPEG Audio 1 channel
3421b-13 - Threadmill part 2.swf...................................: SWF 801x579 4.000 fps 00:05:56.000 MPEG Audio 1 channel
3425 - Slot Mill.swf...............................................: SWF 801x579 4.000 fps 00:04:41.250 MPEG Audio 1 channel
3425-13 - Slot Mill.swf............................................: SWF 801x579 4.000 fps 00:06:34.750 MPEG Audio 1 channel
3425b - Export Operations.swf......................................: SWF 801x579 4.000 fps 00:02:08.500 MPEG Audio 1 channel
3425c - Import Operations.swf......................................: SWF 801x579 4.000 fps 00:03:45.250 MPEG Audio 1 channel
3426 - 2 Vise Set-up Project - Part 1.swf..........................: SWF 801x579 4.000 fps 00:10:15.750 MPEG Audio 1 channel
3427 - 2 Vise Set-up Project - Part 2.swf..........................: SWF 801x579 4.000 fps 00:08:06.750 MPEG Audio 1 channel
3428 - 2 Vise Set-up Project - Part 3.swf..........................: SWF 801x579 4.000 fps 00:05:41.250 MPEG Audio 1 channel
3432 - Transform Toolpaths.swf.....................................: SWF 801x579 4.000 fps 00:07:58.000 MPEG Audio 1 channel
3501 - 2D Sketcher Project 1.swf...................................: SWF 801x579 4.000 fps 00:11:19.250 MPEG Audio 1 channel
3501a-13 - 1st Sketcher Project Part 1.swf.........................: SWF 801x579 4.000 fps 00:08:28.000 MPEG Audio 1 channel
3501b-13 - 1st Sketcher Project Part 2.swf.........................: SWF 801x579 4.000 fps 00:08:28.750 MPEG Audio 1 channel
3502 - 2D Sketcher Project 2.swf...................................: SWF 801x579 4.000 fps 00:09:44.250 MPEG Audio 1 channel
3502a-13 - 2nd Sketcher Project Part 1.swf.........................: SWF 801x579 4.000 fps 00:07:10.000 MPEG Audio 1 channel
3502b-13 - 2nd Sketcher Project Part 2.swf.........................: SWF 801x579 4.000 fps 00:06:47.250 MPEG Audio 1 channel
3503 - 2D Sketcher - Project 3.swf.................................: SWF 801x579 4.000 fps 00:10:26.750 MPEG Audio 1 channel
3504 - 2D Sketcher - Project 4.swf.................................: SWF 801x579 4.000 fps 00:10:01.250 MPEG Audio 1 channel
3505 - 2D Sketcher - Project 5 - Part 1.swf........................: SWF 801x579 4.000 fps 00:07:29.250 MPEG Audio 1 channel
3506 - 2D Sketcher - Project 5 - Part 2.swf........................: SWF 801x579 4.000 fps 00:07:05.250 MPEG Audio 1 channel
3506b - 2D Sketcher Project 6.swf..................................: SWF 801x579 4.000 fps 00:08:12.250 MPEG Audio 1 channel
3507 - XForm Translate - Project 1.swf.............................: SWF 801x579 4.000 fps 00:04:06.000 MPEG Audio 1 channel
3512a - Ten Step Project 1 - part 1.swf............................: SWF 801x579 4.000 fps 00:12:56.000 MPEG Audio 1 channel
3512a-13 - Ten Step Project 1 - Part 1.swf.........................: SWF 801x579 4.000 fps 00:12:47.250 MPEG Audio 1 channel
3512b - Ten Step Project 1 - part 2.swf............................: SWF 801x579 4.000 fps 00:11:54.500 MPEG Audio 1 channel
3512b-13 - Ten Step Project 1 - Part 2.swf.........................: SWF 801x579 4.000 fps 00:11:01.000 MPEG Audio 1 channel
3512c-13b - Stock shading and Display Options.swf..................: SWF 801x579 4.000 fps 00:01:25.250 MPEG Audio 1 channel
3514 - Facing Project 1.swf........................................: SWF 801x579 4.000 fps 00:12:42.000 MPEG Audio 1 channel
3516 - Toolpath Combo Project 1.swf................................: SWF 801x579 4.000 fps 00:13:26.000 MPEG Audio 1 channel
3518 - 2D Contour Project.swf......................................: SWF 801x579 4.000 fps 00:14:33.750 MPEG Audio 1 channel
3601 - SP1 Service Pack 1 Changes.swf..............................: SWF 801x579 4.000 fps 00:06:25.500 MPEG Audio 1 channel
3602 - SP2 MR1 Interface Changes - part 1.swf......................: SWF 801x579 4.000 fps 00:03:32.000 MPEG Audio 1 channel
3603 - SP2 MR1 Interface Changes - part 2.swf......................: SWF 801x579 4.000 fps 00:04:42.000 MPEG Audio 1 channel
3604 - SP2 MR1 Interface Changes - part 3.swf......................: SWF 801x579 4.000 fps 00:03:44.000 MPEG Audio 1 channel
3605 - SP2 MR1 Interface Changes - part 4.swf......................: SWF 801x579 4.000 fps 00:02:38.250 MPEG Audio 1 channel
3606 - Multi-Pass Threadmilling.swf................................: SWF 801x579 4.000 fps 00:01:48.250 MPEG Audio 1 channel
3607 - Toolpath Editor.swf.........................................: SWF 801x579 4.000 fps 00:03:47.750 MPEG Audio 1 channel
3608 - Silhouette Boundary C-Hook.swf..............................: SWF 801x579 4.000 fps 00:02:15.750 MPEG Audio 1 channel
3632 - MR1 Intro to the new HST Machining.swf......................: SWF 801x579 4.000 fps 00:01:53.000 MPEG Audio 1 channel
3632-14 - Introduction to HST Machining - Project 1.swf............: SWF 801x579 4.000 fps 00:07:26.000 MPEG Audio 1 channel
3633 - MR1 Overview of HST Machining.swf...........................: SWF 801x579 4.000 fps 00:07:09.250 MPEG Audio 1 channel
3633-14 - Introduction to HST Machining - Project 2.swf............: SWF 801x579 4.000 fps 00:11:07.250 MPEG Audio 1 channel
3634 - MR1 Core Roughing.swf.......................................: SWF 801x579 4.000 fps 00:04:07.750 MPEG Audio 1 channel
3634-14 - Core Roughing.swf........................................: SWF 801x579 4.000 fps 00:08:02.000 MPEG Audio 1 channel
3635 - MR1 Area Clearance.swf......................................: SWF 801x579 4.000 fps 00:02:44.750 MPEG Audio 1 channel
3635-14 - Area Clearance.swf.......................................: SWF 801x579 4.000 fps 00:08:44.000 MPEG Audio 1 channel
3636 - MR1 Restmill.swf............................................: SWF 801x579 4.000 fps 00:06:13.000 MPEG Audio 1 channel
3636-14 - Restmill Setting.swf.....................................: SWF 801x579 4.000 fps 00:03:42.000 MPEG Audio 1 channel
3637 - Adaptive Stepdown.swf.......................................: SWF 801x579 4.000 fps 00:04:58.500 MPEG Audio 1 channel
3638 - MR1 Horizontal.swf..........................................: SWF 801x579 4.000 fps 00:05:26.250 MPEG Audio 1 channel
3638-14 - Horizontal Finish.swf....................................: SWF 801x579 4.000 fps 00:04:29.500 MPEG Audio 1 channel
3639 - MR1 Waterline.swf...........................................: SWF 801x579 4.000 fps 00:07:12.250 MPEG Audio 1 channel
3639-14 - Waterline.swf............................................: SWF 801x579 4.000 fps 00:08:38.000 MPEG Audio 1 channel
3640 - MR1 Pencil Cutting.swf......................................: SWF 801x579 4.000 fps 00:07:25.250 MPEG Audio 1 channel
3640-14 - Pencil Cutting.swf.......................................: SWF 801x579 4.000 fps 00:06:59.750 MPEG Audio 1 channel
3641 - MR1 Scallop.swf.............................................: SWF 801x579 4.000 fps 00:08:09.000 MPEG Audio 1 channel
3641-14 - Scallop.swf..............................................: SWF 801x579 4.000 fps 00:07:03.750 MPEG Audio 1 channel
3642 - MR1 Raster.swf..............................................: SWF 801x579 4.000 fps 00:08:46.250 MPEG Audio 1 channel
3642-14 - Raster.swf...............................................: SWF 801x579 4.000 fps 00:09:54.500 MPEG Audio 1 channel
3643 - Arc Filter.swf..............................................: SWF 801x579 4.000 fps 00:09:04.000 MPEG Audio 1 channel
3644 - HST Combo Project - Part 1.swf..............................: SWF 801x579 4.000 fps 00:09:02.000 MPEG Audio 1 channel
3645 - HST Combo Project - Part 2.swf..............................: SWF 801x579 4.000 fps 00:07:18.500 MPEG Audio 1 channel
3646 - HST Combo Project - Part 3.swf..............................: SWF 801x579 4.000 fps 00:05:27.000 MPEG Audio 1 channel
3647a - HST Project 2 Roughing - Part 1.swf........................: SWF 801x579 4.000 fps 00:07:15.250 MPEG Audio 1 channel
3647b - HST Project 2 Roughing - Part 2.swf........................: SWF 801x579 4.000 fps 00:07:20.750 MPEG Audio 1 channel
3648a - HST Project 2 Finishing - Part 1.swf.......................: SWF 801x579 4.000 fps 00:08:09.000 MPEG Audio 1 channel
3648b - HST Project 2 Finishing - Part 2.swf.......................: SWF 801x579 4.000 fps 00:04:32.250 MPEG Audio 1 channel
3648c - HST Project 2 Finishing Part 3.swf.........................: SWF 801x579 4.000 fps 00:03:53.000 MPEG Audio 1 channel
3650a - Fastpoint.swf..............................................: SWF 801x579 4.000 fps 00:02:10.500 MPEG Audio 1 channel
3650b - Power Keys.swf.............................................: SWF 801x579 4.000 fps 00:02:20.500 MPEG Audio 1 channel
3650c - AutoCursor Lock Overrides.swf..............................: SWF 801x579 4.000 fps 00:01:41.000 MPEG Audio 1 channel
3650d - Un-Zoom Previous.swf.......................................: SWF 801x579 4.000 fps 00:01:24.250 MPEG Audio 1 channel
3650e - Toolpath Manager.swf.......................................: SWF 801x579 4.000 fps 00:01:48.250 MPEG Audio 1 channel
3650f - Backplot Tool Display.swf..................................: SWF 801x579 4.000 fps 00:02:04.250 MPEG Audio 1 channel
3650g - Toolpath manager Display Settings.swf......................: SWF 801x579 4.000 fps 00:03:13.000 MPEG Audio 1 channel
3650h - User Defined Speeds Feeds.swf..............................: SWF 801x579 4.000 fps 00:04:14.500 MPEG Audio 1 channel
3650i - Chaining Default Options and Level Descriptor.swf..........: SWF 801x579 4.000 fps 00:01:28.000 MPEG Audio 1 channel
3650j - MCX Backup Files.swf.......................................: SWF 801x579 4.000 fps 00:02:52.500 MPEG Audio 1 channel
3650l - MR2 Modify Spline function.swf.............................: SWF 801x579 4.000 fps 00:01:31.250 MPEG Audio 1 channel
3650m - STL Compare.swf............................................: SWF 801x579 4.000 fps 00:03:45.000 MPEG Audio 1 channel
3650n - Browse for External Communications.swf.....................: SWF 801x579 4.000 fps 00:00:40.250 MPEG Audio 1 channel
3650p - Rest Roughing.swf..........................................: SWF 801x579 4.000 fps 00:01:52.750 MPEG Audio 1 channel
3650q - HST Stock to Leave on Floors and Walls.swf.................: SWF 801x579 4.000 fps 00:01:12.750 MPEG Audio 1 channel
3654-13 - Arc Filter Tolerance Interface Differences.swf...........: SWF 801x579 4.000 fps 00:03:20.500 MPEG Audio 1 channel
3655-13 - Arc Filter Tolerance Interface for X4 and Later.swf......: SWF 801x579 4.000 fps 00:07:00.250 MPEG Audio 1 channel
3656-13 - Toolpath Refinement Smoothing.swf........................: SWF 801x579 4.000 fps 00:07:31.250 MPEG Audio 1 channel
3657-13 - Setting Refine Toolpath Defaults.swf.....................: SWF 801x579 4.000 fps 00:01:34.500 MPEG Audio 1 channel
3658-13 - Toolpath Fillet Feature.swf..............................: SWF 801x579 4.000 fps 00:05:59.500 MPEG Audio 1 channel
3660-13 - MultiThreading (For Multi Processor Computers).swf.......: SWF 801x579 4.000 fps 00:03:25.250 MPEG Audio 1 channel
4001-13 - X4 Demo Download Installation Instructions.swf...........: SWF 801x579 4.000 fps 00:03:05.750 MPEG Audio 1 channel
4001-14 - X5 HLE Download Installation Instructions.swf............: SWF 801x579 4.000 fps 00:07:58.250 MPEG Audio 1 channel
4001b-13 - Home Learning Edition Open and Save Files.swf...........: SWF 801x579 4.000 fps 00:03:21.000 MPEG Audio 1 channel
4001btt-13 - Home Learning Edition Open and Save Files.swf.........: SWF 801x579 4.000 fps 00:03:48.000 MPEG Audio 1 channel
4001c-13 - Home Learning Edition Limitations.swf...................: SWF 801x579 4.000 fps 00:03:40.500 MPEG Audio 1 channel
4001ctt-13 - Home Learning Edition Limitations.swf.................: SWF 801x579 4.000 fps 00:04:07.500 MPEG Audio 1 channel
4002 - Version Differences.swf.....................................: SWF 801x579 4.000 fps 00:04:13.750 MPEG Audio 1 channel
4002-13 - Version Differences.swf..................................: SWF 801x579 4.000 fps 00:05:58.250 MPEG Audio 1 channel
4003 - File Open Save and Save Some dialog boxes.swf...............: SWF 801x579 4.000 fps 00:06:31.250 MPEG Audio 1 channel
4003-13 - File Open Save and Save Some dialog boxes.swf............: SWF 801x579 4.000 fps 00:06:23.000 MPEG Audio 1 channel
4005 - Overview of the Operations Manager.swf......................: SWF 801x579 4.000 fps 00:06:17.000 MPEG Audio 1 channel
4009 - General Selection Ribbon Bar.swf............................: SWF 801x579 4.000 fps 00:05:19.000 MPEG Audio 1 channel
4012-13 - Open An STL File Mesh.swf................................: SWF 801x579 4.000 fps 00:02:18.750 MPEG Audio 1 channel
4013 - Importing the.swf...........................................: SWF 801x579 4.000 fps 00:06:13.000 MPEG Audio 1 channel
4015 - Create Line Function.swf....................................: SWF 801x579 4.000 fps 00:05:18.000 MPEG Audio 1 channel
4016 - View Control.swf............................................: SWF 801x579 4.000 fps 00:05:58.500 MPEG Audio 1 channel
4017 - Masking.swf.................................................: SWF 801x579 4.000 fps 00:07:17.000 MPEG Audio 1 channel
4050 - 2D HST Introduction.swf.....................................: SWF 801x579 4.000 fps 00:06:13.500 MPEG Audio 1 channel
4052 - 2D HST Core Roughing.swf....................................: SWF 801x579 4.000 fps 00:05:02.000 MPEG Audio 1 channel
4054 - 2D HST Core Mill Cut Parameters.swf.........................: SWF 801x579 4.000 fps 00:07:28.000 MPEG Audio 1 channel
4056 - 2D HST Area Mill.swf........................................: SWF 801x579 4.000 fps 00:09:54.000 MPEG Audio 1 channel
4056a-13 - 2D HST Dynamic Mill.swf.................................: SWF 801x579 4.000 fps 00:10:35.500 MPEG Audio 1 channel
4057-13 - 2D HST Chaining Tips.swf.................................: SWF 801x579 4.000 fps 00:10:16.250 MPEG Audio 1 channel
4058 - 2D HST Rest Mill.swf........................................: SWF 801x579 4.000 fps 00:06:47.000 MPEG Audio 1 channel
4060 - 2D HST Peel Mill.swf........................................: SWF 801x579 4.000 fps 00:07:21.500 MPEG Audio 1 channel
4061 - 2D HST Peel Mill Part 2.swf.................................: SWF 801x579 4.000 fps 00:04:13.500 MPEG Audio 1 channel
4062 - 2D HST Blend Mill.swf.......................................: SWF 801x579 4.000 fps 00:09:27.000 MPEG Audio 1 channel
4070 - FBM Mill Introduction.swf...................................: SWF 801x579 4.000 fps 00:11:07.500 MPEG Audio 1 channel
4072 - FBM Tool Selection - Part 1.swf.............................: SWF 801x579 4.000 fps 00:05:02.250 MPEG Audio 1 channel
4074 - FBM Tool Selection - Part 2.swf.............................: SWF 801x579 4.000 fps 00:05:29.750 MPEG Audio 1 channel
4076 - FBM Cut Parameters.swf......................................: SWF 801x579 4.000 fps 00:04:40.250 MPEG Audio 1 channel
4080a-13 - FBM Mill Optimization Part 1.swf........................: SWF 801x579 4.000 fps 00:10:03.250 MPEG Audio 1 channel
4080b-13 - FBM Mill Optimization Part 2.swf........................: SWF 801x579 4.000 fps 00:05:28.000 MPEG Audio 1 channel
4090 - FBM Drill Introduction.swf..................................: SWF 801x579 4.000 fps 00:07:22.000 MPEG Audio 1 channel
4110 - System Configuration Overview.swf...........................: SWF 801x579 4.000 fps 00:03:58.500 MPEG Audio 1 channel
4201 - Open SolidWorks Files with History.swf......................: SWF 801x579 4.000 fps 00:00:46.000 MPEG Audio 1 channel
4202 - X-Form Drag.swf.............................................: SWF 801x579 4.000 fps 00:01:20.000 MPEG Audio 1 channel
4202-13 - XForm Drag.swf...........................................: SWF 801x579 4.000 fps 00:04:56.750 MPEG Audio 1 channel
4202b-13 - X-Form Solids.swf.......................................: SWF 801x579 4.000 fps 00:02:11.000 MPEG Audio 1 channel
4203 - 2d High Speed Toolpaths.swf.................................: SWF 801x579 4.000 fps 00:03:53.000 MPEG Audio 1 channel
4204 - FBM Intro Mill Drill Combine.swf............................: SWF 801x579 4.000 fps 00:03:43.750 MPEG Audio 1 channel
4205 - Multi Axis Edge Blending.swf................................: SWF 801x579 4.000 fps 00:00:54.250 MPEG Audio 1 channel
4206 - 3 Axis to 5 Axis Conversion.swf.............................: SWF 801x579 4.000 fps 00:02:34.500 MPEG Audio 1 channel
4227f-13b - Chain Feature Recognition.swf..........................: SWF 801x579 4.000 fps 00:01:27.250 MPEG Audio 1 channel
5000 - Introduction to Mastercam Art v9.swf........................: SWF 640x380 12.000 fps 00:00:00.167
5001 - Video 1.swf.................................................: SWF 801x579 4.000 fps 00:20:31.000 MPEG Audio 1 channel
5002 - Video 2.swf.................................................: SWF 801x579 4.000 fps 00:06:35.500 MPEG Audio 1 channel
5003 - Video 3.swf.................................................: SWF 801x579 4.000 fps 00:06:38.500 MPEG Audio 1 channel
5004 - Video 4.swf.................................................: SWF 801x579 4.000 fps 00:09:33.500 MPEG Audio 1 channel
5005 - Video 5.swf.................................................: SWF 801x579 4.000 fps 00:09:33.750 MPEG Audio 1 channel
5006 - Art - Learning Tools.swf....................................: SWF 801x579 4.000 fps 00:10:35.750 MPEG Audio 1 channel
5007 - Art - Orientation and Setup.swf.............................: SWF 801x579 4.000 fps 00:12:02.250 MPEG Audio 1 channel
5008 - Art - Process Flow Antz - Part 1.swf........................: SWF 801x579 4.000 fps 00:09:29.500 MPEG Audio 1 channel
5009 - Art - Process Flow Antz - Part 2.swf........................: SWF 801x579 4.000 fps 00:10:15.750 MPEG Audio 1 channel
5010 - Art - Toolpath Antz - Part 3.swf............................: SWF 801x579 4.000 fps 00:11:17.000 MPEG Audio 1 channel
5011 - Art - Create Scroll Works Model-3.swf.......................: SWF 801x579 4.000 fps 00:09:45.750 MPEG Audio 1 channel
5012 - Art - Application Styles Celtic Band.swf....................: SWF 801x579 4.000 fps 00:09:21.000 MPEG Audio 1 channel
5013 - Art - Trace Image Dragon - Part 1.swf.......................: SWF 801x579 4.000 fps 00:09:37.250 MPEG Audio 1 channel
5014 - Art - Nested Chains Dragon - Part 2.swf.....................: SWF 801x579 4.000 fps 00:09:50.500 MPEG Audio 1 channel
5015 - Art - Design Library - Part 1.swf...........................: SWF 801x579 4.000 fps 00:10:48.250 MPEG Audio 1 channel
5016 - Art - Design Library - Part 2.swf...........................: SWF 801x579 4.000 fps 00:06:50.750 MPEG Audio 1 channel
5017 - Art - Art Toolpaths - Part 1.swf............................: SWF 801x579 4.000 fps 00:08:50.000 MPEG Audio 1 channel
5018 - Art - Art Toolpaths - Part 2.swf............................: SWF 801x579 4.000 fps 00:12:22.250 MPEG Audio 1 channel
5019 - Art - Art Toolpaths - Part 3.swf............................: SWF 801x579 4.000 fps 00:11:20.000 MPEG Audio 1 channel
5020 - Art - ABS Unwrapped Cylinder.swf............................: SWF 801x579 4.000 fps 00:08:31.000 MPEG Audio 1 channel
5021 - Art - Create Ring Text Band - Part 1.swf....................: SWF 801x579 4.000 fps 00:11:46.000 MPEG Audio 1 channel
5022 - Art - Create Ring Text Band - Part 2.swf....................: SWF 801x579 4.000 fps 00:07:52.250 MPEG Audio 1 channel
5023 - Art - Image to Surface - Part 1.swf.........................: SWF 801x579 4.000 fps 00:09:24.250 MPEG Audio 1 channel
5024 - Art - Image to Surace - Part 2.swf..........................: SWF 801x579 4.000 fps 00:09:05.750 MPEG Audio 1 channel
5025 - Art - Hybrid Modeling - Import STL.swf......................: SWF 801x579 4.000 fps 00:08:44.750 MPEG Audio 1 channel
5026 - Art - Multiple Art Base Surfaces.swf........................: SWF 801x579 4.000 fps 00:09:48.000 MPEG Audio 1 channel
5027 - Art - Surface Types.swf.....................................: SWF 801x579 4.000 fps 00:11:18.750 MPEG Audio 1 channel
5028 - Art - Tips.swf..............................................: SWF 801x579 4.000 fps 00:09:21.000 MPEG Audio 1 channel
5029 - Art - Engrave Toolpath.swf..................................: SWF 801x579 4.000 fps 00:12:22.500 MPEG Audio 1 channel
6000 - X3 Demo Download Installation Instructions.swf..............: SWF 801x579 4.000 fps 00:05:04.250 MPEG Audio 1 channel
6100-13 - Introduction to Streamingteacher.swf.....................: SWF 801x579 4.000 fps 00:07:24.500 MPEG Audio 1 channel
6100b - Certification Introduction.swf.............................: SWF 801x579 4.000 fps 00:03:08.000 MPEG Audio 1 channel
6100c - Mastercam Getting Started Project - Part 1.swf.............: SWF 801x579 4.000 fps 00:09:22.500 MPEG Audio 1 channel
6100d - Mastercam Overview Part 2.swf..............................: SWF 801x579 4.000 fps 00:13:05.000 MPEG Audio 1 channel
6100d-13 - Mastercam Getting Started Project - Part 2.swf..........: SWF 801x579 4.000 fps 00:12:40.000 MPEG Audio 1 channel
6101 - Version Differences.swf.....................................: SWF 801x579 4.000 fps 00:02:00.500 MPEG Audio 1 channel
6102 - Importing CAD Files Importing Options Exporting.swf.........: SWF 801x579 4.000 fps 00:06:28.000 MPEG Audio 1 channel
6103 - About Mastercam Dialog.swf..................................: SWF 801x579 4.000 fps 00:02:19.250 MPEG Audio 1 channel
6104 - Isometric View C-Plane Update.swf...........................: SWF 801x579 4.000 fps 00:05:11.500 MPEG Audio 1 channel
6105 - Tooltips and Learning Mode Prompts.swf......................: SWF 801x579 4.000 fps 00:04:28.500 MPEG Audio 1 channel
6106 - Ribbon Bar Modality.swf.....................................: SWF 801x579 4.000 fps 00:02:38.250 MPEG Audio 1 channel
6107 - Most Recently Used MRU.swf..................................: SWF 801x579 4.000 fps 00:04:31.250 MPEG Audio 1 channel
6107b-13b - Root vs. Immediate Mode Functi

Không có đánh giá cho sản phẩm này.

Viết đánh giá

Tên bạn:


Đánh giá của bạn: Lưu ý: không hỗ trợ HTML!

Bình chọn: Xấu           Tốt

Nhập mã kiểm tra vào ô bên dưới:



Tài liệu khuôn dập NX sẽ giúp bạn thiết kế các chi tiết tấm, và b&..
180.000đ

Delcam Shoemaker là phần mềm có ứng dụng rất rông, dùng trong thiết kế gi..
130.000đ

Tài liệu hướng dẫn hoàn chỉnh các lệnh và công cụ thiết kế tr&ecir..
120.000đ

Phần mềm Autodesk inventor được các công ty cơ khí sử dụng khá nhiều, phầ..
120.000đ

Bạn đã học qua phần thiết kế cơ khí trên phần mềm Solidworks và muốn n&ac..
120.000đ 70.000đ

Việc học các giáo trình mới nhất sẽ giúp bạn cập nhật được những t&iacut..
140.000đ 70.000đ

 Kỹ sư thiết kế công nghiệp sẽ đảm nhiệm việc phát triển sản phẩm thông qua ..
200.000đ

Đây là bộ DVD được giảng viên trung tâm Advance CAD thực hiện để hỗ trợ học..
240.000đ

  Mẫu áo thun Round Tough Mechanical Engineer Vải 1005 Cotton Áo t..
160.000đ 120.000đ

  Mẫu áo Round Tough Mechanical Engineer - có logo Trần Yến ở mặt sau..
160.000đ 100.000đ

  Mẫu áo Trust Me! I'm An Engineer Vải 1005 Cotton Áo thun 100..
160.000đ 120.000đ

  Mẫu áo Trust Me! I'm An Engineer - có logo Trần Yến ở mặt sau (Mẫu s..
160.000đ 100.000đ

  Mẫu áo Mechanical Engineer - có logo Trần Yến ở mặt sau (Mẫu số 01) ..
160.000đ 100.000đ

Mẫu áo Mechanical Engineer (Mẫu số 02) Vải 1005 Cotton Áo thun 100% Cotton..
160.000đ 120.000đ

Chúng tôi chia sẻ file cài đặt phần mềm Autocad 2016 với mục đ&iacut..
Liên hệ

Trong quá trình làm việc và học tập bạn cũng cần có một chứng chỉ..
180.000đ

Không để những người mới học Solidworks hoặc đã học nhưng chưa hiệu quả, chưa nắm được ..
500.000đ 370.000đ
7 đánh giá

Nhằm đảm bảo cho những cá nhân có mong muốn tự học phần lập trình gia c&o..
400.000đ 280.000đ
6 đánh giá

Để việc tự học Solidworks được tốt nhất bạn nên học theo giáo trình đào t..
200.000đ 100.000đ

Phần mềm NX khá nổi tiếng trong giới CAD/CAM/CNC được biết đến là một ông l..
680.000đ 390.000đ
6 đánh giá

Bộ DVD tự học creo này được ưu đãi nhằm giúp cho nhiều người có thể theo..
610.000đ 300.000đ
6 đánh giá

Autocad là phần mềm không thể thiếu cho những người học và làm bên ..
180.000đ 150.000đ

  Giảm 35% bộ DVD Mastercam X8-X9 trong tháng này đến hết ngày 30/06/20..
390.000đ 260.000đ
5 đánh giá

  Giá ưu đãi tới ngày 30/06/2017 Học vận hành CNC không..
570.000đ 399.000đ
6 đánh giá

Khi đã sử dụng được phần thiết kế trên Solidworks thì bạn đã có th..
940.000đ 520.000đ
9 đánh giá

Power Mill là một phần mềm gia công phay mạnh. Nó đã nhận được giải thưởn..
130.000đ

TẠI SAO MUA HÀNG

Mọi sản phẩm đều được đầu tư công phu, đúng mong muốn của khách hàng, chi phí thấp

Giá cả được cập nhật theo hướng có lợi cho người mua

Hỗ trợ và cam kết giá trị tốt nhất, xử lý ngay vấn đề phát sinh

Chuyển phát hàng trên toàn quốc, phí giao đã được hỗ trợ thêm, nhận hàng mới trả tiền. Có gởi linkdown cho khách hàng bận rộn, ở nước ngoài, cần gấp.

Thông tin hoàn toàn chính xác, tư vấn và hỗ trợ nhanh gọn, tiết kiệm thời gian và chi phí.

Thông tin khách hàng được lưu trên hệ thống máy chủ bảo mật, chương trình ưu đãi dành riêng cho khách hàng cũ.

Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...