Chuyên Ngành – Cách Dùng https://cachdung.com Tiện ích cho cuộc sống Thu, 09 Dec 2021 08:45:17 +0000 vi hourly 1 https://wordpress.org/?v=5.9.10 https://cachdung.com/wp-content/uploads/2020/04/cropped-logofv-32x32.png Chuyên Ngành – Cách Dùng https://cachdung.com 32 32 BỘ VIDEO HƯỚNG DẪN SOLIDWORKS NÂNG CAO VỚI 29H THỜI LƯỢNG https://cachdung.com/bo-video-huong-dan-solidworks-nang-cao-voi-29h-thoi-luong-8310.html https://cachdung.com/bo-video-huong-dan-solidworks-nang-cao-voi-29h-thoi-luong-8310.html#respond Mon, 22 Mar 2021 02:22:45 +0000 http://cachdung.tranyen.com/?post_type=product&p=1078 BỘ VIDEO HƯỚNG DẪN SOLIDWORKS NÂNG CAO VỚI 29H THỜI LƯỢNG MÔ TẢ SẢN PHẨM Nếu bạn đang cố gắng luyện thi lấy chứng chỉ solidworks quốc tế và Webinars  thì đây là video không thể bỏ qua, bộ video này với thời lượng khủng mang đến cho bạn những kiến thức chuyên sâu mà [...]

The post BỘ VIDEO HƯỚNG DẪN SOLIDWORKS NÂNG CAO VỚI 29H THỜI LƯỢNG appeared first on Cách Dùng.

]]>
BỘ VIDEO HƯỚNG DẪN SOLIDWORKS NÂNG CAO VỚI 29H THỜI LƯỢNG

MÔ TẢ SẢN PHẨM

Nếu bạn đang cố gắng luyện thi lấy chứng chỉ solidworks quốc tế và Webinars  thì đây là video không thể bỏ qua, bộ video này với thời lượng khủng mang đến cho bạn những kiến thức chuyên sâu mà bạn chưa thể tìm thấy ở các video khác.

SolidWorks 2011-2012 Video Training Mega Collection Pack  | 8.65 GB
Nội dung chính của video này gồm hướng dẫn tạo mô hình 3d cao cấp, thiết kế mặt, tạo khối lắp ráp, xuất bản vẽ, thiết kế kim loại tấm, rendering.

Dưới đây là toàn bộ nội dung của bộ video:
Intro to SolidWorks
Part Modeling
Drawings
Assembly Design
Sheet Metal
Surfacing
PhotoView 360
SolidWorks Certification CSWP
Webinars
Total Files: 205
Total Duration: 28:14:26

The post BỘ VIDEO HƯỚNG DẪN SOLIDWORKS NÂNG CAO VỚI 29H THỜI LƯỢNG appeared first on Cách Dùng.

]]>
https://cachdung.com/bo-video-huong-dan-solidworks-nang-cao-voi-29h-thoi-luong-8310.html/feed 0
RENDER PHỐI CẢNH SOLIDWORKS 2015 https://cachdung.com/render-phoi-canh-solidworks-2015-8359.html https://cachdung.com/render-phoi-canh-solidworks-2015-8359.html#respond Sat, 21 Mar 2020 09:02:12 +0000 http://cachdung.tranyen.com/?post_type=product&p=908 RENDER PHỐI CẢNH SOLIDWORKS 2015 Đây là công đoạn cuối cùng trong rất nhiều phần mềm và render trong Solidworks cũng vậy, Nó giúp người dùng có thể tối ưu hóa phần thiết kế, giúp chi tiết trở nên thật hơn, thể hiện các điều kiện khi sử dụng trong các môi trường khác nhau, [...]

The post RENDER PHỐI CẢNH SOLIDWORKS 2015 appeared first on Cách Dùng.

]]>
RENDER PHỐI CẢNH SOLIDWORKS 2015

Đây là công đoạn cuối cùng trong rất nhiều phần mềm và render trong Solidworks cũng vậy, Nó giúp người dùng có thể tối ưu hóa phần thiết kế, giúp chi tiết trở nên thật hơn, thể hiện các điều kiện khi sử dụng trong các môi trường khác nhau, hiệu chỉnh này giúp tăng tính thẩm mỹ của chi tiết, gây ấn tượng mạnh với người xem.

Phần render trong Solidworks giúp hiệu chỉnh ánh sáng, vật liệu, các điều kiện sáng tối để hoàn toàn làm chủ được chi tiết, và video này cung cấp đầy đủ hướng dẫn và có cả các file thực hành giúp người học học được một cách nhanh nhất mà không phải gặp bất kì trở ngại nào.

Nội dung:
Thời lượng: 190 phút
Dung lượng : 2Gb
Số video: 35

01. Introduction
About The Author
What You Should Expect
0103 How To Access Your Working Files
02. Getting Started
Setting Up Your Command Manager And Toolbars
03. Views, Cameras And Perspective
Display Options
Creating A Camera
Perspective
Saving A View
04. Materials
0401 Adding Material
0402 Basic Versus Advanced
0403 Color And Image
0404 Mapping
0405 Illumination
0406 Surface Finish
0407 Photoview Materials
0408 Luxology Materials
0409 Decals
05. Configurations, Display States, Section Views And Live Section Planes
0501 Creating A Configuration
0502 Creating A Display State
0503 Creating A Section View
0504 Creating A Live Section Plane
0505 Creating An Exploded View
0506 Model Break View
06. Realview And Integrated Preview
0601 RealView Graphics
0602 Integrated Preview
07. Custom Cameras And Lights
0701 Camera Depth Of Field
0702 Creating Fog
0703 Creating A Light Bulb
08. Scenes
0801 PhotoView Scenes
0802 Creating A Basic Scene
0803 Adding Directional Lights
0804 Adding Spot Lights
0805 Adding Point Lights
0806 Adding Material Lights
09. Photoview360
0901 Options
0902 Preview Window
0903 Region Render
0904 Final Render
0905 SolidWorks Task Scheduler
0906 Image Processing
0907 Compare And Options
10. Tips And Tricks
1001 Balance Of Your Scene
1002 Less Is More
1003 Model And Environment Interface
1004 Real Versus Fake
11. Conclusion
1101 Wrap-Up

 

The post RENDER PHỐI CẢNH SOLIDWORKS 2015 appeared first on Cách Dùng.

]]>
https://cachdung.com/render-phoi-canh-solidworks-2015-8359.html/feed 0
Giáo trình đào tạo SolidWorks 2016 https://cachdung.com/giao-trinh-dao-tao-solidworks-2016.html https://cachdung.com/giao-trinh-dao-tao-solidworks-2016.html#respond Fri, 20 Mar 2020 07:48:21 +0000 http://cachdung.tranyen.com/?post_type=product&p=478 Để việc tự học Solidworks được tốt nhất bạn nên học theo giáo trình đào tạo vì với giáo trình này người học sẽ được học từ cơ bản tới nâng cao tính năng của phần mềm Solidworks mà không mấy khó khăn. Hướng dẫn theo dạng giáo trình sẽ giúp người học tự tin hơn khi mới bắt [...]

The post Giáo trình đào tạo SolidWorks 2016 appeared first on Cách Dùng.

]]>
Để việc tự học Solidworks được tốt nhất bạn nên học theo giáo trình đào tạo vì với giáo trình này người học sẽ được học từ cơ bản tới nâng cao tính năng của phần mềm Solidworks mà không mấy khó khăn. Hướng dẫn theo dạng giáo trình sẽ giúp người học tự tin hơn khi mới bắt đầu học mà không phải lo lắng về khả năng tiếp thu.

Giáo trình đào tạo Solidworks 2016 này được nhiều học viên đánh giá cao, học được cả phần thiết kế, lắp ráp và xuất bản vẽ. Những nội dung tương đối đầy đủ cho phần thiết kế cơ khí, và khi đã hoàn thành giáo trình này người học có thể dễ dàng thực hành thêm, học thêm các tính năng nâng cao của phần mềm Solidworks 2016.

Giáo trình đào tạo Solidworks 2016 này dùng được cho các phiên bản 2014 tới 2017, và là dạng giáo trình nên thời gian học sẽ rút ngắn, không lan man như sách hoặc các tài liệu khác.

Giáo trình Solidworks 2016 gồm 203 slide, được in ấn cẩn thận, bạn có thể xem phần mục lục Solidworks và nội dung demo ở slide bên dưới.

Những người phù hợp với giáo trình Solidworks:

  • Chưa có kiến thức nền tảng về phần mềm thiết kế cơ khí 3D
  • Gặp khó khăn trong việc tự học vì từ ngành khác
  • Các công ty cần một giáo trình chuẩn để đào tạo nhân viên
  • Tự học trước Solidworks trước khi tham gia khóa học để tiết kiệm thời gian
  • Không có thời gian tới trung tâm
  • Công nhân, kỹ sư cơ khí từ mảng khác qua (gia công, vận hành,..)

Đặc biệt, sẽ giảm 50% đến hết tháng 06/2016, mọi người có thể đặt mua sớm, tặng kèm file cài đặt phần mềm Solidworks qua mail.

 

The post Giáo trình đào tạo SolidWorks 2016 appeared first on Cách Dùng.

]]>
https://cachdung.com/giao-trinh-dao-tao-solidworks-2016.html/feed 0
HƯỚNG DẪN SỬ DỤNG 3DQUICKMOLD TRONG TẠO KHUÔN SOLIDWORKS 2013 https://cachdung.com/thiet-ke-khuon-nhua-voi-3dquickmold-cho-solidworks-8242.html https://cachdung.com/thiet-ke-khuon-nhua-voi-3dquickmold-cho-solidworks-8242.html#respond Fri, 22 Mar 2019 03:35:08 +0000 http://cachdung.tranyen.com/?post_type=product&p=1177 HƯỚNG DẪN SỬ DỤNG 3DQUICKMOLD TRONG TẠO KHUÔN SOLIDWORKS 2013 Mô tả sản phẩm: Hướng dẫn sử dụng thành thạo phần Plugin chuyên dùng cho tạo khuôn của solidworks, với phần hướng dẫn này là bạn có thể nắm được hầu hết nội dung của phần mềm và có thể áp dụng ngay vào công [...]

The post HƯỚNG DẪN SỬ DỤNG 3DQUICKMOLD TRONG TẠO KHUÔN SOLIDWORKS 2013 appeared first on Cách Dùng.

]]>
HƯỚNG DẪN SỬ DỤNG 3DQUICKMOLD TRONG TẠO KHUÔN SOLIDWORKS 2013

Mô tả sản phẩm:

Hướng dẫn sử dụng thành thạo phần Plugin chuyên dùng cho tạo khuôn của solidworks, với phần hướng dẫn này là bạn có thể nắm được hầu hết nội dung của phần mềm và có thể áp dụng ngay vào công việc của mình.
Trình bày logic và đúng trình tự, rất dễ học.
Thời lượng: 8 giờ 30 phút
Dung lượng 4,5 Gb
Số video: 56
Giá: 250K/2DVD
Nội dung:

 

 

The post HƯỚNG DẪN SỬ DỤNG 3DQUICKMOLD TRONG TẠO KHUÔN SOLIDWORKS 2013 appeared first on Cách Dùng.

]]>
https://cachdung.com/thiet-ke-khuon-nhua-voi-3dquickmold-cho-solidworks-8242.html/feed 0
DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học https://cachdung.com/thiet-ke-solidworks-nguoi-moi-hoc-8327.html https://cachdung.com/thiet-ke-solidworks-nguoi-moi-hoc-8327.html#respond Fri, 22 Mar 2019 03:18:56 +0000 http://cachdung.tranyen.com/?post_type=product&p=1166 DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học   Xem thêm các tài liệu SolidWorks mới nhất Các DVD tự học SolidWorks bạn nên xem DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học dùng cho ứng dụng thiết kế cơ khí Để tiết kiệm và học tốt hơn phần mềm SolidWorks, bạn nên [...]

The post DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học appeared first on Cách Dùng.

]]>
DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học

 

Xem thêm các tài liệu SolidWorks mới nhất
Các DVD tự học SolidWorks bạn nên xem
DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học dùng cho ứng dụng thiết kế cơ khí
Để tiết kiệm và học tốt hơn phần mềm SolidWorks, bạn nên mua trọn bộ 4 DVD SolidWorks 2016 với giá chiết khấu hấp dẫn

Mô tả sản phẩm
Trọn bộ DVD với hơn 50 video chất lượng HD, bạn sẽ nắm bắt nhanh tất cả những nội dung cần học, đặt biệt là với người mới học, hướng dẫn cơ bản chi tiết nên bạn sẽ không gặp nhiều khó khăn trong vấn đề tiếp thu bài học và có thể tự làm.

Với hướng dẫn phong phú, bạn sẽ không bỏ sót bất kì tính năng thú vị nào khi thiết kế trên solidworks, và yên tâm với cách sử dụng lệnh thông minh khi thiết kế sẽ chứng tỏ bạn là người chuyên nghiệp, chứ không chỉ dừng lại ở một số lệnh phổ biến.

Hướng dẫn đầy đủ các công cụ phác thảo, tất cả những tính năng khi dựng hình 2D, tất cả các lệnh cần thiết khi mô hình 3D, những lệnh hiệu chỉnh nhanh, hợp lý tùy theo điều kiện và mục đích thiết kế cụ thể, và cả những lệnh thiết kế nhanh các đối tượng sẵn có như lò xo, ren, bánh răng,..

Tổng video: 51 video
Chất lượng HD
Dung lượng 1,1 Gb
Thời lượng 5 giờ 44 phút
Tất cả đều có sub Tiếng Việt diễn giải chi tiết.

The post DVD video hướng dẫn thiết kế SolidWorks 2013 người mới học appeared first on Cách Dùng.

]]>
https://cachdung.com/thiet-ke-solidworks-nguoi-moi-hoc-8327.html/feed 0
Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013 https://cachdung.com/khuon-solidworks-co-ban-9329.html https://cachdung.com/khuon-solidworks-co-ban-9329.html#respond Fri, 22 Mar 2019 03:05:46 +0000 http://cachdung.tranyen.com/?post_type=product&p=1137 Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013   Xem thêm các tài liệu SolidWorks mới nhất Các DVD tự học SolidWorks bạn nên xem Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013 dùng cho ứng dụng thiết kế khuôn Để tiết kiệm và học tốt hơn phần mềm SolidWorks, bạn nên mua trọn [...]

The post Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013 appeared first on Cách Dùng.

]]>
Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013

 

Xem thêm các tài liệu SolidWorks mới nhất
Các DVD tự học SolidWorks bạn nên xem
Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013 dùng cho ứng dụng thiết kế khuôn
Để tiết kiệm và học tốt hơn phần mềm SolidWorks, bạn nên mua trọn bộ 4 DVD SolidWorks 2016 với giá chiết khấu hấp dẫn

Phần thiết kế khuôn là phần tương đối khó cho những người chưa qua trường lớp (chưa có kiến thức cơ bản về khuôn), tự học thì hoàn toàn có thể được nhưng thời gian lâu hay mau lại là vấn đề quan trọng. Do vậy nếu chưa biết gì về solidworks và khuôn thì bạn nên tìm các tài liệu hướng dẫn cơ bản trước.

Tài liệu cơ bản dành cho những người mới học về phần thiết kế khuôn trên SolidWorks, phần này sẽ hướng dẫn chi tiết từ lúc thiết kế đến khi tiến hành các công đoạn phân khuôn, thêm các cơ cấu khuôn cho sản phẩm. Tài liệu cũng tập trung vào các vấn đề khi thiết kế khuôn, nhưng ở mức độ cơ bản.

Phần thiết kế khuôn trên SolidWorks sẽ còn tập nâng cao, với phần này thì bạn sẽ hoàn toàn làm chủ được quá trình tính toán các thông số khuôn đến khi chế tạo khuôn hoàn chỉnh. Còn với tài liệu cơ bản bạn chỉ mới học được các lý thuyết và ứng dụng cơ bản của phần thiết kế khuôn trênSolidWorks.

Số trang: 130 trang
Giá: 100.000 VND

Mục lục
I.     Giới thiệu. 4
II.    Giới thiệu chung về solidwork. 4

1. Bắt đầu với SolidWorks . 5
2.    Nghiên cứa bản vẽ chi tiết Part . 6
3.    Các lệnh chỉnh sửa vẽ nhanh các đối tượng 2D.. 10
4.    Tạo các đối tượng 3D từ đối tượng 2D.. 14
6.    Các lệnh cơ bản Mold Tool trong solidworks. 23
1.     Planar Surface: 23
2.       Offset Surface: 25
3.     Ruled Surface: 25
4.     Filled Surface: 27
4.     Kint Surface: 29
5.     Draft Analysis: 33
6.     Undercul Detection: 34
7.     Draft: 35
8.     Scale:   36
9.     Parting lines: 38
10.      Shut-off Surfaces: 38
11.      Parting Surfaces: 39
12.      Tooling Split: 40
13.      Core: 43
III.      Bài tập thực hành. 44
    Giới thiệu chung về khuôn. 44
1.    Bài 1: tạo khuôn cho vỏ điện thoại 45
A.    Checking for Draft(Kiểm tra góc nghiêng) 45
B. Adding Draft( Thêm góc nghiêng) 49
C. Applying Scaling( thu phóng mô hình) 52
D. Generating Parting Lines( Tạo đường chia) 54
E. Adding Shut-off Surfaces( Thêm bề mặt vá) 57
F. Creating Parting Surfaces(Tạo Mặt phân Khuôn) 59
G. Preparing for the Tooling Split 61
H.  Tách khuôn. 63
G. Moving the Core from the Cavity(Di Chuyển lõi khuôn khỏi lõi) 67
i. Enhancing Mold Visibility (tăng khả năng quan sát cho khuôn) 69
    Enhancing Mold Visibility (continued) 69
3.    Bài ví dụ 2: Thiết kế và tạo khuôn với chi tiết dạng hộp. 70
a.     Vẽ phác thảo. 71
b.    Tạo khuôn. 83
4.    Bài tập 3: tách khuôn đơn giản với lệnh Combine. 107
a.     Phác thảo chi tiết 108
b.    Tạo khuôn. 116

Phần trích lược:

The post Sách hướng dẫn thiết kế khuôn cơ bản trên SolidWorks 2013 appeared first on Cách Dùng.

]]>
https://cachdung.com/khuon-solidworks-co-ban-9329.html/feed 0
DVD VIDEO HƯỚNG DẪN VẼ LAMBOGHINI AVENDATOR BẰNG SOLIDWORKS TỪ A-Z https://cachdung.com/dvd-video-huong-dan-ve-lamboghini-avendator-bang-solidworks-tu-az-8320.html https://cachdung.com/dvd-video-huong-dan-ve-lamboghini-avendator-bang-solidworks-tu-az-8320.html#respond Fri, 22 Mar 2019 03:01:45 +0000 http://cachdung.tranyen.com/?post_type=product&p=1129 DVD VIDEO HƯỚNG DẪN VẼ LAMBOGHINI AVENDATOR BẰNG SOLIDWORKS TỪ A-Z MÔ TẢ SẢN PHẨM Với thời lượng gần 8 tiếng, video này sẽ hướng dẫn bạn vẽ tất cả nội ngoại thất của siêu xe lừng danh, Có thể hiểu là khi vẽ các bộ phần của xe thì bạn cũng đã vẽ với [...]

The post DVD VIDEO HƯỚNG DẪN VẼ LAMBOGHINI AVENDATOR BẰNG SOLIDWORKS TỪ A-Z appeared first on Cách Dùng.

]]>
DVD VIDEO HƯỚNG DẪN VẼ LAMBOGHINI AVENDATOR BẰNG SOLIDWORKS TỪ A-Z

MÔ TẢ SẢN PHẨM

Với thời lượng gần 8 tiếng, video này sẽ hướng dẫn bạn vẽ tất cả nội ngoại thất của siêu xe lừng danh, Có thể hiểu là khi vẽ các bộ phần của xe thì bạn cũng đã vẽ với nhiều trang thiết bị cơ khí, các bộ phận mà bạn cũng thường gặp nhiều trong các dự án sau này như vô lăng, hệ thống phanh, hộp số, cản gió, hốc gió, la răng, lốp xe, khung sườn xe,..

Thiết kế nhiều bộ phận bằng phần mềm solidworks, người hướng dẫn cũng chọn trình tự sao cho bạn dễ làm theo nhất, từ phần dễ nhất đến khó nhất, và hướng dẫn bạn cả cách render để cho ra nhiều mẫu ấn tượng và có thể show cho mọi người cùng chiêm ngưỡng.

Thời lượng 5 giờ
Chất lượng HD
Dung lượng 3,5 Gb

The post DVD VIDEO HƯỚNG DẪN VẼ LAMBOGHINI AVENDATOR BẰNG SOLIDWORKS TỪ A-Z appeared first on Cách Dùng.

]]>
https://cachdung.com/dvd-video-huong-dan-ve-lamboghini-avendator-bang-solidworks-tu-az-8320.html/feed 0
DVD TRỌN BỘ VIDEO HƯỚNG DẪN VẼ AUDI R8 TRÊN SOLIDWORKS 2013 ( 4 NGÀY) https://cachdung.com/dvd-tron-bo-video-huong-dan-ve-audi-r8-tren-solidworks-2013-4-ngay-8318.html https://cachdung.com/dvd-tron-bo-video-huong-dan-ve-audi-r8-tren-solidworks-2013-4-ngay-8318.html#respond Fri, 22 Mar 2019 02:58:01 +0000 http://cachdung.tranyen.com/?post_type=product&p=1124 DVD TRỌN BỘ VIDEO HƯỚNG DẪN VẼ AUDI R8 TRÊN SOLIDWORKS 2013 ( 4 NGÀY) MÔ TẢ SẢN PHẨM Có thể video này nhiều bạn đã nghe qua rồi hoặc đã xem ở đâu đó, tuy nhiên bên mình chỉ cung cấp các video gốc, nghĩa là các video từ chính hãng chứ không phải [...]

The post DVD TRỌN BỘ VIDEO HƯỚNG DẪN VẼ AUDI R8 TRÊN SOLIDWORKS 2013 ( 4 NGÀY) appeared first on Cách Dùng.

]]>
DVD TRỌN BỘ VIDEO HƯỚNG DẪN VẼ AUDI R8 TRÊN SOLIDWORKS 2013 ( 4 NGÀY)

MÔ TẢ SẢN PHẨM

Có thể video này nhiều bạn đã nghe qua rồi hoặc đã xem ở đâu đó, tuy nhiên bên mình chỉ cung cấp các video gốc, nghĩa là các video từ chính hãng chứ không phải tổng hợp ở đâu, và trong tất cả video này đều có các thư mục file thực hành đi kèm, đầy đủ hoàn chỉnh.

Khi vẽ hoàn chỉnh:
Tất cả các video đều ở độ phân giải HD, trên 1280×720, do đó xem trên các màn hình lớn khi thực hành rất là đã.

Với hơn 53 video và gần 15 giờ thời lượng, đồng nghĩa với bạn phải bỏ ra  hơn 3 ngày liên tục để hoàn thành hướng dẫn này, hãy kiên nhẫn và dành thời gian cho hướng dẫn bạn sẽ nắm được hầu như hoàn chỉnh các lệnh thiết kế trên phần mềm solidworks, chưa kể với hướng dẫn của các chuyên gia có kinh nghiệm thiết kế từ nước ngoài, tin chắc là ngôn ngữ thiết kế của bạn cũng được nâng tầm.

Và khi phỏng vấn về thiết kế bạn có thể mang những mẫu thiết kế này hoặc tương tự để thuyết phục nhanh nhất nhà tuyển dụng.

Sau khi render:

Dưới đây là thông tin đầy đủ của DVD:

Thời lượng 14 giờ 44 phút
Dung lượng :  3Gb
Video: HD

The post DVD TRỌN BỘ VIDEO HƯỚNG DẪN VẼ AUDI R8 TRÊN SOLIDWORKS 2013 ( 4 NGÀY) appeared first on Cách Dùng.

]]>
https://cachdung.com/dvd-tron-bo-video-huong-dan-ve-audi-r8-tren-solidworks-2013-4-ngay-8318.html/feed 0
TRỌN BỘ SOLIDWORKS WORLD 2012 (NÂNG CAO) https://cachdung.com/tron-bo-solidworks-world-2012-nang-cao-8312.html https://cachdung.com/tron-bo-solidworks-world-2012-nang-cao-8312.html#respond Fri, 22 Mar 2019 02:38:56 +0000 http://cachdung.tranyen.com/?post_type=product&p=1085 TRỌN BỘ SOLIDWORKS WORLD 2012 (NÂNG CAO) SolidWorks World 2012 Software Used: SolidWorks | Resolution: 800×640(.mp4) | Audio: AAC 32 Kbps | 12.3 Gb Difficulty: Advanced | Language: English | Presentation files: included Đây là giáo trình và tài liệu hướng dẫn của các công ty đào tạo lớn cho các nhân viên chuyên về [...]

The post TRỌN BỘ SOLIDWORKS WORLD 2012 (NÂNG CAO) appeared first on Cách Dùng.

]]>
TRỌN BỘ SOLIDWORKS WORLD 2012 (NÂNG CAO)

SolidWorks World 2012
Software Used: SolidWorks | Resolution: 800×640(.mp4) | Audio: AAC 32 Kbps | 12.3 Gb
Difficulty: Advanced | Language: English | Presentation files: included

Đây là giáo trình và tài liệu hướng dẫn của các công ty đào tạo lớn cho các nhân viên chuyên về thiết kế lấy các chứng chỉ thiết kế hàng đầu thế giới từ solidworks như CSWP hoặc CSWE. Nếu bạn cũng có tham vọng lấy được chứng chỉ chuyên gia này mà không cần phải bỏ ra đến vài ngàn đô la cho các khóa học thì đây là lựa chọn tối ưu. TUy nhiên nếu tự học phải biết cách sắp xếp thời gian cũng như nghiêm túc trong việc học.

Nội dung của toàn bộ file này gồm:
SolidWorks World 2012/Adam Green – DriveWorksXpress – Hands-on Design Automation
SolidWorks World 2012/Adrian Fanjoy – Allowing SolidWorks to Perform
SolidWorks World 2012/Adrian Velazquez – Automation Techniques Pick One…. or Two
SolidWorks World 2012/Ajit Patil – Basics of API PropertyManager Page
SolidWorks World 2012/Alan Gomez – Integrating Solidworks into Our Middle and High Schools
SolidWorks World 2012/Alex Ruiz – Dimensioning and Tolerancing Using GDT – The Minimalist Approach
SolidWorks World 2012/Alin Vargatu – Manage Custom Properties Anywhere Why Where and How
SolidWorks World 2012/Andreas Blom-Bakke – Sketching -Tips and Tricks
SolidWorks World 2012/Andreas Spieler – eDrawings – Collaborate More Effectively
SolidWorks World 2012/Andrew Schutte – Guiding Your Engineering Department to the Next Level
SolidWorks World 2012/Andy Hall – Utilizing Mold Tools and Other Techniques for Better Mold Design
SolidWorks World 2012/Ange Horst – Advanced Weldment Techniques in Large-Scale Live Theater
SolidWorks World 2012/Annika Nauheimer – DraftSight Support Tools
SolidWorks World 2012/Arnav Mukherjee – API Jump-Start
SolidWorks World 2012/Arnav Mukherjee – Assembling for Motion Simulation
SolidWorks World 2012/Asheen Phansey – Overview of Environmental Regulations
SolidWorks World 2012/Ashland Brown – Development and Assessment of Finite Element Active Learning Modules
SolidWorks World 2012/Ben Hagler – PLM-in-a-Box Enterprise PLM Solution
SolidWorks World 2012/Beth Galang – The Design Process UAV Prototype Using SolidWorks and Dimension 3D Printers
SolidWorks World 2012/Blake Young – Industry Support with SolidWorks at Boise State University
SolidWorks World 2012/Brandon Roby – Maximizing Your SolidWorks Productivity
SolidWorks World 2012/Brandon Roby – SolidWorks Routing – Easier Than You Thought
SolidWorks World 2012/Brian Harrison – Visual Computing Redefining the SolidWorks Workstation for Productivity
SolidWorks World 2012/Brian Lindahl – Effective Use of the Hole Wizard
SolidWorks World 2012/Brian Long – Property Tab Builder
SolidWorks World 2012/Brian Zias – Connecting the Design Dots with SolidWorks Simulation Sustainability and Costing
SolidWorks World 2012/Bryan Ray – SolidWorks Certification the Circle of Life
SolidWorks World 2012/Cali McMillian – Get with the Program API for 3DVIA Composer
SolidWorks World 2012/Charles Culp – Advanced Surfacing Techniques
SolidWorks World 2012/Chris Castle – Master Model for Everyone Part 1
SolidWorks World 2012/Chris Snider – Create Interactive Animations in 3DVIA Composer
SolidWorks World 2012/Christina Feist – SIMULIA Next Generation Realistic Simulation
SolidWorks World 2012/Christopher Garcia – SolidWorks and Anarks Rapid Move to 3D Model-based Definition and 3D PDF TDPs
SolidWorks World 2012/Christopher Narveson – Evaluating Component Cost Reduction Options Using SolidWorks Simulation
SolidWorks World 2012/Christopher Weiss – Using SolidWorks to Manage a Tier 1 Automotive Program
SolidWorks World 2012/Corey Bower – File References- Where Did It Go
SolidWorks World 2012/Craig Therrien – Introduction to SolidWorks Costing
SolidWorks World 2012/Craig Therrien – Introduction to SolidWorks Costing 2
SolidWorks World 2012/Craig Therrien – SolidWorks Costing Design for Cost and Automate Quoting
SolidWorks World 2012/Cristian Fustos – A Day in the Lifecycle of a Project at Polychem Systems
SolidWorks World 2012/Crystal Yazvac – The Wonderful Wizard of FeatureWorks
SolidWorks World 2012/Dan Burmenko – Experience nFuze for SolidWorks
SolidWorks World 2012/David Jacobs – Advanced Vault Customization and Add-ins for SolidWorks Enterprise PDM Vaults
SolidWorks World 2012/David Molyneaux – Rapid 3D Reconstruction and Interaction with Microsoft Kinect
SolidWorks World 2012/David Watters – Break through Development Barriers with Dell Precision� and NVIDIA� Maximus�
SolidWorks World 2012/David Woodruff – The Virtual Flowbench
SolidWorks World 2012/Dean Purvis – Configuration Publisher Creating Model Variations Fast
SolidWorks World 2012/Delphine Genouvrier – Manage Your Thermal Challenges with Success
SolidWorks World 2012/Delphine Genouvrier – Present and Document Your Products in a Whole New Way with 3DVIA Composer
SolidWorks World 2012/Dinesh Dhamija – Modeling Considerations for Design Automation � from Sales to Manufacturing
SolidWorks World 2012/Don Van – Newer Drawing Functionality
SolidWorks World 2012/Don Van – Weldments From A to Z
SolidWorks World 2012/Drew Adams – Surfacing 101 Getting Started with Surfaces
SolidWorks World 2012/Edward Eaton – Gaming the System – Tricky Tricks for Modeling and Editing
SolidWorks World 2012/Edward Honda – Expanded Guide to Plastic Part Design-Rel.5.0
SolidWorks World 2012/Edward Honda – Pocket Guide to Plastic Part Design-Rel.5.0
SolidWorks World 2012/Elise Moss – Project-based Learning with SolidWorks
SolidWorks World 2012/Elise Moss – SolidWorks Tips for HybridElectric Vehicle Design
SolidWorks World 2012/Eric Bright – SolidWorks Templates 101 – Parts Assemblies and Drawings
SolidWorks World 2012/Eric Flynn – Design to Manufacture – Utilizing Solidworks and Additive Manufacturing
SolidWorks World 2012/Eric Leafquist – Creating Routing Content to Speed Your Designs (PipingElectricalTubing)
SolidWorks World 2012/Eric Leafquist – Large Design Review (SW2012) — Tips and Tricks During the Design Process
SolidWorks World 2012/Eric Leafquist – Making Your 3D Models Ready for the Sales Department
SolidWorks World 2012/Eric Leafquist – Pipe Routes Welds Drawings Weld Tables — Putting It All Together
SolidWorks World 2012/Eric Munsing – Setting a Sustainable Product Strategy with SolidWorks Sustainability
SolidWorks World 2012/Eric Samson – The Microsoft Platform for 3D and PLM
SolidWorks World 2012/Eric van Essen – PID – A New Design Flow for Piping
SolidWorks World 2012/Frank Pampreen – Enterprising SolidWorks Enterprise PDM with Web Services
SolidWorks World 2012/Frank Ruepp – Automate Your Design with Equations
SolidWorks World 2012/Frank Ruepp – Surfaces Handy Little Helpers for Machine Design
SolidWorks World 2012/Gabriel Corbett – Sheet Metal Design Secrets � Enclosure Design
SolidWorks World 2012/Gary Bunch – Tables Templates and Libraries
SolidWorks World 2012/Greg Jankowski – CAD Manager Survival Guide
SolidWorks World 2012/Hari Padmanabhan – SolidWorks Animation Basic Motion and Motion Analysis – What When How
SolidWorks World 2012/Hari Padmanabhan – SolidWorks Motion – Basics
SolidWorks World 2012/Harold Wylie – d4AM Design for Additive Manufacturing
SolidWorks World 2012/Ilan Singer – DraftSight UI Customization
SolidWorks World 2012/James Krivoshein – Sharing Assemblies without Giving It All Away
SolidWorks World 2012/Jay Seaglar – SolidWorks Motion � Concepts Tips and Tricks
SolidWorks World 2012/Jeff Barker – Chaos vs. Control The Use of Templates in Your SolidWorks Enterprise PDM Environment
SolidWorks World 2012/Jeff Parker – Advanced Sheet Metal Techniques
SolidWorks World 2012/Jeff Setzer – Optimizing Computer Systems for SolidWorks
SolidWorks World 2012/Jeff Sweeney – ECxs in Your SolidWorks Enterprise PDM
SolidWorks World 2012/Jeremiah Davis – How Dispatch Changed My Vault
SolidWorks World 2012/Jeremy Clark – SolidWorks Mates Tips Tricks and Common Sense
SolidWorks World 2012/Jeremy Regnerus – Weldments Do They Have to Be Welded
SolidWorks World 2012/Jerry Winters – VSTA and SolidWorks Enterprise PDM – Powerful Solutions
SolidWorks World 2012/Jerry Winters – VSTA – Taking the Training Wheels Off
SolidWorks World 2012/Jim Boland – Move It � Move It � Move It Motion Drivers for Animations
SolidWorks World 2012/Jim Boland – Smoke and Mirrors � Tips Tricks and Techniques for Better Animations
SolidWorks World 2012/Jindrich Novak – Optimizing Machines with SolidWorks Motion and SolidWorks Simulation
SolidWorks World 2012/Joe Galliera – Flow Simulation Advanced Methods
SolidWorks World 2012/Joe Rousseau – Publishing 3DVIA Composer Content
SolidWorks World 2012/Joe Rowsey – How to Build and Maintain Effective Design Tables
SolidWorks World 2012/Johnathen Lieber – Deploying and Administrating SolidWorks in a Multi-User Environment
SolidWorks World 2012/Johnathen Lieber – SolidWorks Add-Ins What Are They and What Do They Do
SolidWorks World 2012/John Ellsworth – Approaches for Collaborating on Designs
SolidWorks World 2012/John Setzer – Secrets of File Management
SolidWorks World 2012/Jordan Tadic – Surfacing Tricks for Solid Modelers
SolidWorks World 2012/Jose Pereiras – Dynamic Analysis of Large Structures
SolidWorks World 2012/Josh Spencer – Staying on Track with the Design Checker
SolidWorks World 2012/Josh Spencer – Weldment From Start to Finish and Everything in the Middle
SolidWorks World 2012/Joy Garon – Basics of T-SQL and Reporting
SolidWorks World 2012/Joy Garon – SolidWorks Enterprise PDM Dispatch
SolidWorks World 2012/Joy Garon – Using XML Documents in SolidWorks Enterprise PDM
SolidWorks World 2012/Julien Boissat – SolidWorks Simulation Concepts Tips and Tricks
SolidWorks World 2012/Justin Webster – SolidWorks Enterprise PDM Integration Best Practices
SolidWorks World 2012/Keith Rice – Goldmember 99 Must-Know Methods and Properties of the SolidWorks API
SolidWorks World 2012/Keith Rice – Taking Macros to the People – Hands-On for Beginners
SolidWorks World 2012/Ken Denton – Enhance Your SolidWorks Productivity with a 3D Mouse
SolidWorks World 2012/Keri Prasky – Maximizing Your Efficiency with 3DContentCentral
SolidWorks World 2012/Ketul Patel – Welded Structures from Proper Implementation Pit Falls to Drawings
SolidWorks World 2012/Kishore Garakipati – Document Reference Validation Tool
SolidWorks World 2012/Kurt Lundstedt – ENOVIA Collaborative Design for SolidWorks Overview
SolidWorks World 2012/Kyle Kraudy – SolidWorks Enterprise PDM � Enabling Data Exchange between SolidWorks and SAPERP
SolidWorks World 2012/Lars Christensen – Dumb Solids – Make Them Your Friend in SolidWorks
SolidWorks World 2012/Li-Ling Huang – Top 10 Tips to Utilize Design Study
SolidWorks World 2012/Mandar Parkhi – Programmingless Design Automation for Complex Products
SolidWorks World 2012/Marcelo Hendler – Leveraging the Power of SolidWorks Enterprise PDM to AEC Market
SolidWorks World 2012/Marc Young – Different Customization Approaches and Options for SolidWorks Enterprise PDM
SolidWorks World 2012/Mark Athey – License and Registration Please
SolidWorks World 2012/Mark Biasotti – My Favorite 20 Tips and Tricks
SolidWorks World 2012/Mark Lyons – DraftSight Demonstration
SolidWorks World 2012/Mark Lyons – DraftSight for the SolidWorks User
SolidWorks World 2012/Marlon Banta – Advanced MotionManager Techniques
SolidWorks World 2012/Marlon Banta – Introduction to the SolidWorks MotionManager
SolidWorks World 2012/Mary Beth Raven – Help Yourself�to a Whole Lot of User Assistance
SolidWorks World 2012/Matthew Cummins – Drag Drop Snap Smile (New and Improved)
SolidWorks World 2012/Matthew Lorono – Advanced Customization Techniques in SolidWorks
SolidWorks World 2012/Matthew Lorono – TolAnalyst and DimXpert A Perfect Fit for Tolerancing and Stack-up Analysis
SolidWorks World 2012/Matthew Perez – Using Sketch Blocks for Designing Mechanical Assemblies
SolidWorks World 2012/Matthew Rece – Managing Large Assemblies and Drawings
SolidWorks World 2012/Matt Rohr – Part Modeling Best Practices
SolidWorks World 2012/Michael Craffey – Automating DriveWorks with the DriveWorks and SolidWorks APIs
SolidWorks World 2012/Michael Craffey – Automating Powerful Output Documents with DriveWorks and SolidWorks
SolidWorks World 2012/Michael Newell – Hands-on Look at SolidWorks Enterprise PDM Search and Copy Tree
SolidWorks World 2012/Mike Fitzpatrick – Tips and Tricks – Mastercam in Your Classroom
SolidWorks World 2012/Mike Garvelink – SolidWorks Administration – The Things DS SolidWorks Doesnt Tell You About
SolidWorks World 2012/Mike Spens – Introduction to the SolidWorks Enterprise PDM API
SolidWorks World 2012/Mike Spens – Tips and Strategies for Large Automation Projects
SolidWorks World 2012/Nadia Shea – SolidWorks for IT
SolidWorks World 2012/Nate Holmes – Bring Your Machine CAD Model to Life with Simulation
SolidWorks World 2012/Nathan Miller – Introduction to Administrative Image
SolidWorks World 2012/Neil Custard – SolidWorks Drawing Automation without Programming
SolidWorks World 2012/Neil Custard – SolidWorks Tips and Tricks You Need to Know
SolidWorks World 2012/Neil Custard – SolidWorks Tips and Tricks You Need to Know 2
SolidWorks World 2012/Nicholas Benner – Design Automation for Today and the Future
SolidWorks World 2012/Nick Birkett-Smith – PhotoView 360 Technical Tips and Tricks
SolidWorks World 2012/Nicole Turley – Best Practices for Leveraging 3D CAD Data across the Enterprise
SolidWorks World 2012/Oboe Wu – SolidWorks Add-ins Extending the Solution
SolidWorks World 2012/Olivier Zegdoun – Tuning Your Workstation to Get the Best Out of SolidWorks
SolidWorks World 2012/Omar Zohni – Moving from Point FEA Solutions to Simulation-driven Design
SolidWorks World 2012/Omar Zohni – Streamlining Electrical Design and Validation with SolidWorks
SolidWorks World 2012/Pat Curran – The Impact of SolidWorks on Technology Education in Ireland
SolidWorks World 2012/Paul Gimbel – Applying Excel as a SolidWorks Calculation Engine
SolidWorks World 2012/Paul Gimbel – Automating Analysis with the API
SolidWorks World 2012/Phil Sluder – Best of SolidWorks Tips and Tricks 2012
SolidWorks World 2012/Phil Sluder – What�s Old with SolidWorks 2012
SolidWorks World 2012/Ramesh Lakshmipathy – Basics of FEA
SolidWorks World 2012/Randy Simmons – Intro to Routing (Piping and Tubing Only)
SolidWorks World 2012/Randy Simmons – Intro to SolidWorks Mold Tools
SolidWorks World 2012/Richard Eckenrode – 3D TDPs for the DoD
SolidWorks World 2012/Rob Jost – Using SolidWorks Fastening Features for Plastic Design
SolidWorks World 2012/Rob Jost – Working with Imported Geometry
SolidWorks World 2012/Rob Lacey – Linking ECAD and MCAD with the ProStep EDMD Format
SolidWorks World 2012/Rob Rodriguez – Lights Camera Action Using PhotoView 360 and SolidWorks Motion for Animation Creation
SolidWorks World 2012/Rob Rodriguez – PhotoView 360 Instant Images
SolidWorks World 2012/Rodney Harper – Electrical Routing Hands-on
SolidWorks World 2012/Rustin Webster – IAW ASME Y14.5 – Use It Only if You Know It
SolidWorks World 2012/Ryan Noble – Effective Use of SolidWorks Tools – Getting It Right the First Time
SolidWorks World 2012/Ryan Zeck – Preempting SolidHeadaches
SolidWorks World 2012/Sal Lama – Building PropertyManager Interfaces to Configure Your Models
SolidWorks World 2012/Shrikant Savant – Advanced Simulation Techniques Using SolidWorks Motion
SolidWorks World 2012/Stephen Endersby – The Beginners Guide to Nonlinear Analysis
SolidWorks World 2012/Stephen Endersby – Weldment Analysis with SolidWorks Simulation
SolidWorks World 2012/Sushant Sinha – Design Automation through Design Tables
SolidWorks World 2012/Sylvain Trudel – Experience SolidWorks Enterprise PDM Administration and Configuration Tools
SolidWorks World 2012/Sylvain Trudel – Experience SolidWorks Enterprise PDM Administration and Configuration Tools Part 2
SolidWorks World 2012/Thomas Parel – PV360 2Fast 2Furious
SolidWorks World 2012/Tim Claridge – Using CircuitWorks to Bring PCB Designs into SolidWorks
SolidWorks World 2012/Timothy Paris – Implement SolidWorks Enterprise PDM in a Day
SolidWorks World 2012/Tobias Schnaars – Large Assembly Managment – Tips and Tricks
SolidWorks World 2012/Tod Cruikshank – 3DVIA Composer Hands-on Tips and Tricks and Version 6 Release 2012x Feature Review
SolidWorks World 2012/Tod Cruikshank – Communicating 3D Technical Product Information with 3DVIA Composer
SolidWorks World 2012/Todd Werginz – 30+ Things That YOU Definitely Missed from Essentials
SolidWorks World 2012/Tom Salomone – Tips and Tricks 2012 Getting Top Performance from Your DesktopLaptop
SolidWorks World 2012/Tom Siemaszko – Composing a SolidWorks Symphony
SolidWorks World 2012/Tom Siemaszko – The SolidWorks Installation Manager
SolidWorks World 2012/Tony Di Donato – Plant Design – An Integrated Approach
SolidWorks World 2012/Tyler Beck – Better Faster Sketching
SolidWorks World 2012/Tyler Beck – Faster Modeling
SolidWorks World 2012/Utpal Kumar – Weld Bead 101 – yyyyyThe Quick and Dirty Wayyyyyy
SolidWorks World 2012/Wayne Tiffany – SolidWorks Best Practices – Why I Do It Like This
SolidWorks World 2012/Wayne Tiffany – SolidWorks Sheet Metal – Why I Do It Like This
SolidWorks World 2012/Werner Reiser – Interdisciplinary Workflow in Mechatronic Projects
SolidWorks World 2012/Wes Shimanek – Sneak Peek – What is Up Next for Intel Xeon-based Workstations
SolidWorks World 2012/William Dziedzic – Flow Simulation � Concepts Tips and Tricks
SolidWorks World 2012/William Dziedzic – Your First Steps with Flow Simulation
SolidWorks World 2012/William Martin-Otto – Workstation vs. Desktop Making the Switch

The post TRỌN BỘ SOLIDWORKS WORLD 2012 (NÂNG CAO) appeared first on Cách Dùng.

]]>
https://cachdung.com/tron-bo-solidworks-world-2012-nang-cao-8312.html/feed 0
HƯỚNG DẪN LẬP TRÌNH CẮT DÂY EDM VỚI PLUGIN CAMWORKS CHO SOLIDWORKS https://cachdung.com/huong-dan-lap-trinh-cat-day-edm-voi-plugin-camworks-cho-solidworks-8337.html https://cachdung.com/huong-dan-lap-trinh-cat-day-edm-voi-plugin-camworks-cho-solidworks-8337.html#respond Fri, 22 Mar 2019 02:19:53 +0000 http://cachdung.tranyen.com/?post_type=product&p=1072   HƯỚNG DẪN LẬP TRÌNH CẮT DÂY EDM VỚI PLUGIN CAMWORKS CHO SOLIDWORKS Mô tả sản phẩm Phần mềm camworks là phần mềm gia công được viết bởi bên thứ 3, nó hỗ trợ rất tốt các công đoạn và quy trình gia công cho phần mềm solidworks, bạn chỉ cần cài phần mềm này [...]

The post HƯỚNG DẪN LẬP TRÌNH CẮT DÂY EDM VỚI PLUGIN CAMWORKS CHO SOLIDWORKS appeared first on Cách Dùng.

]]>

 

HƯỚNG DẪN LẬP TRÌNH CẮT DÂY EDM VỚI PLUGIN CAMWORKS CHO SOLIDWORKS

Mô tả sản phẩm
Phần mềm camworks là phần mềm gia công được viết bởi bên thứ 3, nó hỗ trợ rất tốt các công đoạn và quy trình gia công cho phần mềm solidworks, bạn chỉ cần cài phần mềm này vào và sử dụng nó ngay trên giao diện của phần mềm solidworks, điều này khá tiện lợi vì bạn không phải cài đặt nhiều phần mềm, chuyển đổi dữ liệu, mà thao tác cùng lúc.

Phần cắt dây này sẽ hướng dẫn phần giao diện của modul cắt dây, các tính năng của modul này.
Sau đó là các bài tập thực hành để cắt chi tiết theo các yêu cầu kỹ thuật khác nhau.

Dung lượng 450Mb
Thời lượng : 2 giờ
Sub Việt hoàn chỉnh
Giá: 120.000đ

Tất cả video đều được thêm phần sub Việt đi kèm nhằm giúp mọi đối tượng có thể học được, chất lượng video HD và nội dung đầy đủ, bạn sẽ không mấy khó khăn để hoàn thiện kiến thức về phần cắt dây với Camworks.

 

The post HƯỚNG DẪN LẬP TRÌNH CẮT DÂY EDM VỚI PLUGIN CAMWORKS CHO SOLIDWORKS appeared first on Cách Dùng.

]]>
https://cachdung.com/huong-dan-lap-trinh-cat-day-edm-voi-plugin-camworks-cho-solidworks-8337.html/feed 0